guard

On Ebay is a pedestal guard ring item #230581325005.Do you think it would work on my E27 "YS" pedestal ? ? ? Thanks Ron...

Hi To All,Shortly after buying an E27 5 years ago,I started looking into adding a pedestal guard.I contacted Edson,sent them photos and talked to them on the phone.They told me that I did not have room enough for a pedestal guard.Apparently due to the traveler right in front of the helm.Since...

It's been a year since a good friend EY.org member convinced us to sell the old beautiful chart-plotter so we could get one that would support AIS and radar displays. At the time, little did we know that it would take a real re-engineering of the pedestal guard and pedestal attachment to mount...

Pedestal has "Edsen USA 0-398" marked on the bottom and on the top has "2nd" on the steering column. I also have a straight pedestal guard, the top plate, black plastic cover, clear yellow compass cover and hardware. This all came with an 85 30+ I purchased but I already have a fully...

I want to add a pedestal guard to my E-27. The cheapest on-line I could find was about $120. I called a local SS rail fabricator and he estimated around $75-$100. I have also been keeping an eye out for one at Minney's in Costa Mesa and even Dan's in Long Beach. Before I move forward...

Just got off the phone with Garmin and confirmed that the original anti-glare coating on my screen is history and the cost of sending it back to get the screen recoated is prohibitive. So, does anyone have any experience with these anti-glare plastic type films? A particular brand or type to...

I am looking for a pedestal guard for a 77 E29 with a YS binnacle

I am calling around to marine fabricators to get a new pedestal guard. This will be 1" 316 SS, thick wall tubing with 12.5" center to center width and 50" height. Guards can be shortened if needed with a simple pipe cutter. It is a simple single bend guard. Nothing fancy. I am hoping we...

http://cgi.ebay.com/ebaymotors/_Boat-Parts-Accessories-Gear__Wheel-guard-sailboat_W0QQitemZ280238655220QQadnZBoatQ20PartsQ2cQ20AccessoriesQ20Q26Q20GearQQadiZ2823QQcmdZViewItem?hash=item280238655220& The guard is described as being 12.5" wide, and that would be the correct width for a Yacht...

Would someone be so kind as to give me the measurements for the extra-wide pedestal guard that is mounted on the cockpit divider of the E32-2? I want to see about having one made. As I understand, they are impossible to find. Thanks, Charles

Coast Guard Works To Rescue Boats In Distress (CBS) LONG BEACH, Calif. A three-masted tall ship with 40 people aboard has managed to re-enter Long Beach Harbor after taking on water about seven nautical miles from the coast.**The Coast Guard says pumps were placed on board the 130-foot American...

I am installing a new chart plotter and find that the pedestal guard is non-standard. No surprise to many on the list. I am looking for sugggestions from those that have been down this road. I have reviewed two previous threads and it looks like Loren has come across the solution that might fit...

C-ya is a 1978 34T. I live and cruise around southeast AK year-round. Currently I am buying a handtroll permit for salmon. However, I am having a very hard time getting my commercial fishing endorsement with the coast guard because I don't have a 'build letter' which testifies that my...

My stock vertical SS straight guard is in fine shape, but we need a taller angled one on which to mount a chartplotter/GPS unit. (The guard we have has the top loop just a bit higher than the top of the compass.) So far my research finds new ones available for Edson in several configurations...

Hey All... I need a pedestal guard for my E35II 1979. Problem is, all I can find are guards with 9.5inch widths. Due to the design of the 35II, the pedestal sits just aft of the mainsheet traveler on the cockpit "separation" partition. I feel that this prevents the pedestal guard from being...

My Father in-law was out in the San Juan Islands years ago cruising and monitoring the VHF. He hears a woman frantically calling the Coastguard. The Coastguard answers with the usual all business precision they are known for. The woman explains they are onboard a powerboat somewhere near San...

Where can I find a new/used/or custom order pulpit guard for Ericson 35-2? Must fit on the bridge deck.

I have a 1986 ER 35 III with the stainless guard over the deck box forward of the mast. the guard is thru bolted with self locking nuts on the underside of the deck and inside the headliner. A small leak has developed, and the water runs inside the headliner and is discoloring the teak cabin...

Can anybody clairify what a Coast Guard Registration is and the benefits of such.