wanted

Hi all, I am looking for a masthead unit for a Datamarine wind speed/ apparent wind indicator. Hoping someone has an idea of where one can be purchased at a reasonable price, or even better, someone has a box of old instruments they would like to convert to boat bucks. Thanks...

have an old apelco loran c i want to install in the nav station. am looking for a antenna for it. have seen some 4 footers on e bay but would like a short base loaded antenna if i can find one to put on the stern rail.. thanks greg 74 35II # 325

Flush deck model, any condition. Thanks!

As some of you know, when I bought my 1972 E27, it did not have the dinette table or the head door. If anyone out there has a spare they'd consider selling me, I'm all ears. Very tight budget, though. I'll likely build my own but if there's one lying around....... Thanks...

I am looking for a used spinnaker (symmetrical) for an Ericson 38. If anyone has one sitting around in the garage or dock box wanting to see the glory of the open sea... please let me know. I need one for the Newport to Ensenada race in April and can't afford a new one at this time. I could...

I am needing a full set of sails for our 38-200. Please let me know if you have a few available. Thanks, James

I'm looking to replace my old hatch with something a bit less rotten. Does anyone have any suggestions?

contact weinlaw@maine.rr.com. neal weinstein

Looking to buy an e26!

I am looking for a new/used pedestal for my dinette table for my 1976 32. I am looking specifically the mounts that bolt/screw to the cabin sole and the underside of the table. My existing mount is stripped where the T-bolt threads into the mount on the sole. I have had to drill it out and...

I need a spinnaker for my E32. Mine was stolen and I'm going to wait a little prior to purchasing a new one. It was not stolen off the boat, but more than likely being used to spice up some teenagers room. shaun

With all the talk about RADAR, I am interested in putting it onboard. Does anyone have reccomendations on what to get? I know I want a color system... But I don't know where to look. Am I better off mixing and matching the dome and display on eBay to save money, or should I buy a brand new...

I'm looking for an E-38 preferrably in the Great Lakes region (I'm in MN). Anyone have a lead?? Thanks in Advance Carl

I put this on the 'For Sale and Wanted' listing, but thought I would add it here also. While I am not looking to take advantage of the horrendous damage that has taken place in Florida due to the hurricanes (my sister and my nephew and his family live in Punta Gorda/Port Charlotte and were...

I am looking for a good used self-leveling radar mount, preferably backstay mount. Len Buchanan s/v WindShadow E32 scourge32@sbcglobal.net

:egrin: :egrin: Need a hanked headsail or used roller furling system for my E-29. Any leads would be great. Thanks, Ray Hughes, "Capricious" Oceanside Harbor, Oceanside, CA.

Looking for a clean (non-project) Ericson in the 28-30 ft. range. Plan to keep it in the Chesapeake Bay area. Your 1st email should be an accurate, detailed description of the boat. ADShriv@Verizon.net

I require some help and some information. We need to transport an E25 centerboard keel from Florida to Texas. We have a 2-ton truck so it would be no problem for us to pull the boat. 1) Does anyone know where I can get a new or used trailer? 2) Has anyone modified a used trailer to...

Looking for E 23 centerboard model on or near the Gulf Coast. Please email pictures, price etc. to bawood3@yahoo.com Mobile, Alabama

After reading all the literature and postings I've decided that I'm pretty serious about buying an E-23. The trouble is I've never even seen one! I'll be travelling down the west coast from Canada to California this fall and would really like to see one of these boats. Can anybody help? My...

anyone selling dodger outhere , maybe a yellow 1..... have a 29 E , 78' :D

Hi, I'm looking for an Ericson 35 mark 3 on the west coast, preferably in the Pacific Northwest. I would like the deep keel version. Anybody wanting to sell or knows anyone thinking of selling, please give me a call. Many thanks, Steve Gabbott Vancouver Canada

Hi all... in the midst of thinking about E35's I came across an E29 at what appears to be a potentially pretty good price. Since the 35 was going to be a little bit of a stretch for me, I am thinking seriously about the 29. I would appreciate any comments/info on potential weak spots, sailing...

I'm considering a new mainsail for my Ericson 29. I would consider a used one if you have one in very good condition. Otherwise I may well purchase a new one. i have quotes from about $700 to $ 2500. Does anyone have a recommendation for a sail maker? What is the advantage of full battens...

Hi, Wanted: Ericson 35 mk 3 in Pacific Northwest. Steve

I am intereste in getting a 25+, and live near Puget Sound. You can call at 360 629 4356, or use dld at fidalgo . net Damon

Looking for a set of decent used cushions in white or blue for early 70's E-35.

Dear all, I am looking for a KVH Quadro dual line digital display in good condition. Mine is waterlogged and KVH no longer makes or services these units. E-mail or call me... Jim Jones Seattle 206-281-8446

I am looking for a used pedestal/wheel steering setup for my '74 E27. Contact Steve at steve@paperlesslawoffice.com if you have one for sale. Thanks.

Must have a #6 tape (Harken).

I am very interested in buying an Ericson/Olson 34 in the Great Lakes, anyone know of one that may be for sale. Thanks Carl.

Hi, I am looking for some stanchion bases for my 68' E23. Anyone have some old ones laying around that they would like to sell? They look like this...

My boat had the misfortune of being in La Paz when hurricane Marty hit, both the bow and stern pulpits were completely destroyed. If anyone has a used set of bow and stern pulpits from a similarly sized boat please let me know. I can do minor modifications if it is not a perfect fit.

Anyone have an asymmetric spinnaker/gennaker for an E38 that they dont use enough to justify keeping? I would be delighted to buy it. Email direct: ware@qed.econ.queensu.ca Thanks, Roger Ware, Kingston, ON

I am looking for a steering wheel & pedistal assembly and related hardware to change an E27 From tiller to wheel. Any comments about doing change would be appreciated.

Cash buyer seriously searching for an Ericson 38 200 (1986 - 1990) in good condition or better. Probably should be no further west than Lake Michigan. Roger Ware, Kingston, ON.

Ericson 38 Wanted Ericson 38 wanted 1981-1985 located on the west coast.:egrin:

Hello I have a Barient 21 non-self tailoring aluminum drum winch that needs parts. One paw and the some of the internal gears. If anyone has any parts please let me know I'll get a complete list. Thanks Robert

E-27 Looking for headsails and a traveler. Possibly a spinnaker too.

Does anyone have the COMBI instrument gauges for a 1984 30+? The wind direction went out on mine but I hope to find a replacement rather than put in new instruments. email to grbgrb@aol.com Thanks, :egrin:

I am looking for a spinnaker for an Ericson 29, anyone have a chute sitting around they would like to sell?

My wife an I are looking to purchase a 38E. We live in the KC Kansas area. If you have or know of one 'for sale by owner' please contact me. :cheers:

Interested in a decent 115% or 155% headsail. Needs to be in good enough shape to do club racing. Looking for a reasonable price. Prefer dacron, but would consider mylar.

:egrin:

:egrin:

West Coast sailor seeking 36C.....will make offer on ANY reasonably priced/equipped vessel! Please call or e-mail Captain Bob Chambers 619-464-0476 rchambers@ucsd

Currently looking to buy a 34' or 35' 1988 to 1990 Erison in excellent condition located in California. Gene Stoddard

Currently looking to buy a 1988 to 1990 34' or 35' in excellent condition. Gene Stoddard

Looking for a used Spinnaker pole for an E29, preferably in the NorthEast - they are kinda hard to ship!!! I believe the dimensions to be 12'x2 1/2" Contact John Ahearn860-244-1622 or e-mail at jahearn@mdp.com:egrin:

Does anyone have any extra woodgrain Tee moulding for sale? I understand that Outwater sells it but the minimum order length is 250 feet, and I don't need that much. The is for the trim piece between the teak inside trim and hatch boss for my Ericson 35-3. I need two pieces approximately...

Wanted E30+ I am looking for an Ericson 30+ on the east coast or gulf coast. It must have a shoal draft; the 5'10" keel is too deep for where I sail. Any leads will be greatly appreciated.

I am looking to add some type of backstay adjuster to my 1985 Ericson 32 this year. I thought I might ask if anyone has one they want to get rid of before I buy a new one? I'll consider any kind but would prefer hydraulic.

Team Ericson: I am looking for a used asymmetrical spinnaker for my E-28+ (Luff 34'-37'). kpruitt@surfside.net Kurt

Need a good quality used jib to replace mine (I think it's original from '73!). Either a 100%,110% or a 135%. Approx. dimensions are luff: 35-37'6" leech: 32-36' foot: 14-17'. Please email me at rschaffn@usc.edu, thanks!

I HAVE AN ERICSON 26 ANT AM SEEKING SOME DECALS WITH THE ERICSON LOGO FOR THE CRAFT...WHERE CAN I FIND THESE... REPLIES PLEASE TO BRIANSWEENEY2000@EXCITE.COM

I am in the process of restoring an Ericson 26. I need a pair of #10 primary winches for head sail sheet control. Gary

:( Our Seaward two burner stove/oven combination has had the knob decals worn off which makes it nearly impossible to know what they were when the stove was new. If someone would assist with information from their stove it would be appreciated. I have tried to contact the Marine service...

Boat Wanted Ericson 32 or 34 Wanted

I'm looking for a 27' or larger boat in the southeast region. I'm willing to do some repairs on anything but the hull.

Hi, I'm looking for a mid-80's Ericson. If anyone in the Chesapeake Bay area has one they are interested in selling, please email me. Thanks, Chris clomvardias@syscom.

I am looking for a used prop for my 1970 E35 MK II; repowered with a Yanmar 3 GMD. 3/4" shaft, Martec suggest a 14" RH x 14" dia. if I go with another folding prop. Have to trade/sell 1: 12"RH x 6P x 3/4" shaft fixed 2 blade and also, 1: Martec elliptical folding 12" RH x 6P x 3/4" shaft. Thanks...

I'm looking for a used fixed prop for my E-38,1986 32H.P. Universal diesel. I think a 16" diameter with a pitch of 13 or 14 & a 1" bore. Two or Three blade O.K.

I am in North Carolina.

I am interested in purchasing a 1988-1993 Ericson 38. Prefer Shoal keel and Eastern US location. If you have a boat that matches and are interested in selling it soon, send me an email. I would also be interested in how current owners like the boat. thanks

Am looking to buy an Ericson Scorpion, also known as a 5.5 meter.email fire@itol.com