This Spring Project for Discovery (1983 E-30+) is to a continuation of a Rub Rail replacement project. The bow and stern chainplates are of unknown age and the bow chainplate is definitely cracked. With the rub rail project completed, I removed the anchor locker to gain access to the bow chainplate in preparation of removal. Once the anchor locker was removed I found wet and delaminated wood separating the anchor locker space and the forward berth. Other surprises included wet backing plates on the forward stanchions. And then there was Loren Beaches recent suggestion to add backing plates to the forward cleats.
To this end I am purchasing the following materials for the project for community interest.
Divinycell H80 Grid Scored
COM-212248 -- 1/4 inch
Price: $77.88
Or
COM-84842 -- 3/8 inch
Price: $93.00
G10 BackingPlates
COM-G10-1/4-3x6-6 -- Backing Plate 1/4 inch x 3 inch x 6 inch - 6 Pack
Price: $54.99 Limited Stock
Sikaflex 291b
Price: $14.99 10 oz cartridge
or
Totalseal
Price: $15.99 10 oz cartride
Mark "Souleman" Soule
To this end I am purchasing the following materials for the project for community interest.
Divinycell H80 Grid Scored
COM-212248 -- 1/4 inch
Price: $77.88
Or
COM-84842 -- 3/8 inch
Price: $93.00
G10 BackingPlates
COM-G10-1/4-3x6-6 -- Backing Plate 1/4 inch x 3 inch x 6 inch - 6 Pack
Price: $54.99 Limited Stock
Sikaflex 291b
Price: $14.99 10 oz cartridge
or
Totalseal
Price: $15.99 10 oz cartride
Mark "Souleman" Soule