Wind River
Inactive Member
Hello, I have some delamination in my deck that I want to repair. Does anyone have any experience with pressure injecting resin? I was reading about a fellow that had injected epoxy resin into his deck using a grease gun. He actually installed a grease nipple on the deck and pumped resin into the void.
I have already repaired three 2x4 ft. sections in my deck where I drilled hundreds of holes, filled them with epoxy resin, sanded off and resurfaced the non skid using Gibco flex mold. Excellent results….but it is a lot of work!
The deck skins are perfect in the area that I am thinking of injecting. Just some crackling when you step on it. So, I guess I am looking for a quicker fix before I get out the drill and order more flex mold. Any suggestions are welcome. Thanks, George
I have already repaired three 2x4 ft. sections in my deck where I drilled hundreds of holes, filled them with epoxy resin, sanded off and resurfaced the non skid using Gibco flex mold. Excellent results….but it is a lot of work!
The deck skins are perfect in the area that I am thinking of injecting. Just some crackling when you step on it. So, I guess I am looking for a quicker fix before I get out the drill and order more flex mold. Any suggestions are welcome. Thanks, George