Florida 1988 Ericson E-38-200 For Sale

[skywalker]

• 38' Ericson Ericson 38-200

I'm listing our boat here first until Monday Feb 14th then will be posting public

Year: 1988

Asking Price: $45,000

Located in Port Charlotte, Florida

Hull Material: Fiberglass

Engine/Fuel Type: Single Diesel

YW# 5106-1956526

Just listed. Lots of upgrades.

New cabin cushions

Cabin sole refinished

Main cabin port light seals changed

Rebuilt injector pump in 2018

New dripless shaft seal

All head hoses replaced 2020

Manual head with holding tank rebuilt 2022

New exhaust riser and elbow 2020

All galley water hoses replaced 2020

New sink faucet

New Manual Foot pump freshwater

Dual Racor fuel filter bypass system

Great sails, spinnaker, lazy jacks, whisker pole that stores on the mast

Please note that I suggest new rigging.

Additional Specs, Equipment and Information:

LOA: 38' LWL: 30' 6" Beam: 12'

Displacement: 15500 Draft: 4' 11" Ballast: 6300 lbs

Fuel: 55 gal Water: 80 gal

Fold up dinghy and 6 HP outboard and tank

Engine Lift

Sails:

New North Sails cruising spinnaker with snuffer

UK full batten main

New Hall Rigid Quick Vang vang in 2000

Mast mounted adjustable whisker pole

3 genoas

Harken roller furling

Harken Batt Car system

Harken lazy jacks

Hydraulic backstay adjuster

Aluminum double spreader spar stepped on keel

Mainsheet traveler

VHF Radio with DSC and MMSI 2007 Standard Horizon Ram+ Command Helm Microphone with DSC

New Marine Jenson stereo with cabin and cockpit speakers

Electrical and Mechanical

Isotherm Compact Refrigeration System in 2008

Inboard Universal diesel engine 32HP fresh water cooled

New Engine Motor Mounts in 2007

Fireboy Xintex Propane Sensor System in 2008

54 gallon fuel tank with fuel shut of valve

Manual bilge pump

Electric automatic bilge pump

Bilge blower

Fuel shut off valve for propane system

Fume detector new in 2008

2 Batteries in 2 bank system with switch

Automatic Battery Charger

Dual 30 amp shorepower inlets

Dockside electrical cables 12V and 110V

Deck & Hull

Wing keel shoal draft design

Fairwinds Canvas Dodger, Bimini with Connector, Sail and Pedestal / Wheel Cover

Maxi 3-Blade 16 x11 feathering Prop

Rocna Anchor with chain and rode

Fortress Back Up Anchor w/ Chain & Line Anchor Rode

Lewmar windlass

Anchor locker on foredeck

Teak cockpit table revarnished 2022

Edson pedestal steering with engine controls

Fenders and lines

Double lifelines with port and starboard gates

White fiberglass deck with grey nonskid

Navigation lights

Spreader lights

Fold down S.S. Swim ladder

 

[Teamsibo]

Is this the engine under sink set up?

 

[skywalker]

Is this the engine under sink set up?

The engine is under the steps

 

[p.gazibara]

Bold to name a vessel after Endeavor, lol

 

[Dave G.]

Skywalker,
Can you tell me what slips go for in Port Charlotte ?

 

[skywalker]

Skywalker,
Can you tell me what slips go for in Port Charlotte ?

Our go to is Fishermans Village Marina. Its $15/ft monthly

 

[skywalker]

As requested here is some more photo's

 

[Saverio]

beautiful boat

 

[Shawn Rodel]

Yes it is a beautiful boat, we are just up the coast from you New Port Richey. We have #274 88 38-200

 

[goldenstate]

Nice boat! Good luck with the sale.

 

[ddoles]

Great looking boat! I've got her sister ship # 262.

 

[skywalker]

New Port Richey....hello neighbor

 

[William K]

Hello, Skywalker - is Endeavour still available for sale? You can reach me at wmfk@aol.com if she is. I'm looking for an E38 or E380 and Endeavour looks pretty. I wonder if you ever fixed the sole puddling at the base of the mast? Thanks!

 

[skywalker]

yes still for sale.....I just sent you an email

 

[skywalker]

The water drains down the mast and into the bilge where it gets pumped out. When I had the sole redone a groove was cut into the 2 halves that circle the base and now the water drains straight in. I also epoxied the bottom of those 2 halves.

 

[Blue Streak]

Beautiful boat!

 

[skywalker]

This boat has sold, its been fun on this website thank you

 

[Mainessailor]

• 38' Ericson Ericson 38-200

I'm listing our boat here first until Monday Feb 14th then will be posting public

Year: 1988

Asking Price: $45,000

Located in Port Charlotte, Florida

Hull Material: Fiberglass

Engine/Fuel Type: Single Diesel

YW# 5106-1956526

Just listed. Lots of upgrades.

New cabin cushions

Cabin sole refinished

Main cabin port light seals changed

Rebuilt injector pump in 2018

New dripless shaft seal

All head hoses replaced 2020

Manual head with holding tank rebuilt 2022

New exhaust riser and elbow 2020

All galley water hoses replaced 2020

New sink faucet

New Manual Foot pump freshwater

Dual Racor fuel filter bypass system

Great sails, spinnaker, lazy jacks, whisker pole that stores on the mast

Please note that I suggest new rigging.

Additional Specs, Equipment and Information:

LOA: 38' LWL: 30' 6" Beam: 12'

Displacement: 15500 Draft: 4' 11" Ballast: 6300 lbs

Fuel: 55 gal Water: 80 gal

Fold up dinghy and 6 HP outboard and tank

Engine Lift

Sails:

New North Sails cruising spinnaker with snuffer

UK full batten main

New Hall Rigid Quick Vang vang in 2000

Mast mounted adjustable whisker pole

3 genoas

Harken roller furling

Harken Batt Car system

Harken lazy jacks

Hydraulic backstay adjuster

Aluminum double spreader spar stepped on keel

Mainsheet traveler

VHF Radio with DSC and MMSI 2007 Standard Horizon Ram+ Command Helm Microphone with DSC

New Marine Jenson stereo with cabin and cockpit speakers

Electrical and Mechanical

Isotherm Compact Refrigeration System in 2008

Inboard Universal diesel engine 32HP fresh water cooled

New Engine Motor Mounts in 2007

Fireboy Xintex Propane Sensor System in 2008

54 gallon fuel tank with fuel shut of valve

Manual bilge pump

Electric automatic bilge pump

Bilge blower

Fuel shut off valve for propane system

Fume detector new in 2008

2 Batteries in 2 bank system with switch

Automatic Battery Charger

Dual 30 amp shorepower inlets

Dockside electrical cables 12V and 110V

Deck & Hull

Wing keel shoal draft design

Fairwinds Canvas Dodger, Bimini with Connector, Sail and Pedestal / Wheel Cover

Maxi 3-Blade 16 x11 feathering Prop

Rocna Anchor with chain and rode

Fortress Back Up Anchor w/ Chain & Line Anchor Rode

Lewmar windlass

Anchor locker on foredeck

Teak cockpit table revarnished 2022

Edson pedestal steering with engine controls

Fenders and lines

Double lifelines with port and starboard gates

White fiberglass deck with grey nonskid

Navigation lights

Spreader lights

Fold down S.S. Swim ladder

Hi is there any chance you could tell me where you got the replacement seals for the portlights?
Ours are shot on my E-38-200
I’m in port Charlotte BTW
Thanks

 

[Loren Beach]

Hi is there any chance you could tell me where you got the replacement seals for the portlights?
Ours are shot on my E-38-200
I’m in port Charlotte BTW
Thanks

He has not checked in since Oct. 2022. Best use the site messaging scheme. Just click on his site name, click on Start Conversation, and send a message. Given that his former boat was an '88, it may have had the same Lewmar opening ports as our boat. A friend of mine installed all new rubber seals on his (same) ports in an '86 E-38. Lot of work, it was. I chose to replace all of ours in 2021 with new ones. I believe that they are much improved in design. Of course, YMMV.
Lots of opening-port threads on this site, some searching will net you a ton of relevant reading and solutions to ponder. There are some pix of our new ones in place in my blog, FWIW.
Happy holidays,
Loren