I just have come back from a week anchoring out on Bear Lake in Utah. I used a D5 dinghy that I built and am very pleased with it. But... how do you tie it up to the boat at night. I tried several techniques and am not completely satisfied with any of them. I first tried just the painter and letting it drift depending on the wind to keep it behind the boat. Wrong !!! Bump, bump, bump all night. I then tried booming it out with a wisker pole, but sometimes the wave action was too violent and I was afraid the pole would be destroyed. I finally settled on tying up to the bow and stern of the dinghy against fenders along the side of the boat. This worked, but was pretty noisy. Any wisdom and suggestions out there. Thanks,