LeifThor
Member III
1972 E35-2
I recently needed to stress check a lower shroud.
I loosened the lower shrouds, and found the support beam in the cabin between mast and hull had moved slightly making it so the head door wouldn’t close. Compression plate recently replaced there’s no sag whatsoever.
I screwed up and when I loosened the shrouds DID NOT remove tension from the boom vang.
Anyone have any ideas how to fix this? It moved about 1/4in but shows no change in position at the top or bottom of the post, and the post isn’t bowed, its straight perfect. Very confused...
help
I recently needed to stress check a lower shroud.
I loosened the lower shrouds, and found the support beam in the cabin between mast and hull had moved slightly making it so the head door wouldn’t close. Compression plate recently replaced there’s no sag whatsoever.
I screwed up and when I loosened the shrouds DID NOT remove tension from the boom vang.
Anyone have any ideas how to fix this? It moved about 1/4in but shows no change in position at the top or bottom of the post, and the post isn’t bowed, its straight perfect. Very confused...
help