wires

I am converting my E35-2 to internal halyards. I am now at the wire phase of the project. It seems that there is no easy way! My plan is to use 4 10' PVC thin wall water pipes to run the 42' span. I figure I can in several spots drill a 1/2 inch hole in the pipe and a hole through the other side...

Here in Maine it is almost boat season so I've begun thinking about spring boat projects for our E32-200. Last summer we found ourselves off shore in a fairly severe thunderstorm. When we returned to port I decided to check our boats bonding system and found that there is none. The mast...

I am sure someone knows this one: how do the wires get to the mast on a 35-2? It appears that they would run under the corner moldings in the head and then out the roof, but it would suck to rip all that finely finished wood out to find it ran through the roof. What is the best way to get...

hi all 74 35II # 325 i have a tabernacle mast. and i'm trying to chase the wiring for the spreader lights and mast head. the wires come out the mast and go under the mast plate. the next time i see the wires the come up inboard of the holding tank run outboard then aft thru the bench...

Broken Alternator Wire = "Entropy" The constant decay of everything to a lower level of order... in the universe... or something like that. So we were motoring home for 5 wind-less hours, one day last week. 'Twas the finish of a nice little vacation trip down the river to the sea and back. I...

Greetings, I am about to install a wind machine on the mast head of my '88 E34 equipped with a Kenyon mast. I currently have the wires for the masthead light, steaming light, VHF & TV antenna cable running down the mast. I know the area behind the sail track contains these wires in some...