Recent content by Petro206

A little update since the recent freezing temps. So we're in the process of replacing the headliner. When we purchased the vessel, the PO had removed all the headliner, but never finished the project. So now, we've put foam insulation up and are preparing the actual headliner pieces. That being...

To be clear, the Dow 795 is to go between the frame and the gelcoat, or do you (can you) use it to replace the glazing?

I 100% agree with the easiest way. I loathe NW winters. It's definitely not the headliner, as we stripped all of this out to update to a more modern look. Sounds like the Dow 795 might be our next step. As for the cabinsides, I have noticed where they do thin up near the corners. Hadn't...

It was not. Just the butyl tape on the exterior and the frame extrusions inside the frame.

We can't really tell at this point, but your suggestion for Dow 795 is clutch. It's exactly what I was thinking as my next step, a liquid mold, if you will, to fill these damn frames and every little crevice they can find. As for caulk, definitely not using that. It was a clear silicone marine...

I am a stickler on typos. I honestly knew better, but was so excited to post that one, I wasn't paying attention. Surprised my phone allowed it! Haha. Thanks for the heads up! LOVE your profile image!

Hey everyone! Wanted to share a recent upgrade to our folding table of our 34t. We’re a bunch of crib fanatics, so we wanted to have a way to have a crib game always on the boat. The solution came in the original teak centerpiece of the folding table, as it’s the perfect size for a board...

Ok, I’m at my wits end here and need some help from fellow yachters! Since purchasing our 34T, the windows have been our #1 pest. The previous owner had removed all of them and taped plastic over the openings. Don’t even get me started on removing the seasons old tape residue. But now we’ve...

Sorry for the wasted discussion all. Turns out my co-owner forgot to replace a cable to it's post that was causing all the problems. However, we did get to know our electrical system quite a bit better, so it wasn't a complete waste! LOL. Interestingly enough, in regards to the Reverse...

Good call! I have some of those. Thanks Jerry.

Hey Christian, so it's interesting you mentioned that. We're 100% positive we installed the plug correctly, but seeing as how the Reverse Polarity light doesn't turn off ever, it makes me think that either the cable is bad, or the supply of the slip. I will add this note on the DC, when my...

Sorry! That's an older photo. We've since cleaned it all up. Forgot to mention that.

Thanks Tin, So the Smart Plug came in after the fact from the Rev Polarity, but the previous plug had a burn mark in it, so we wanted to get that replaced asap. We have two plug-ins at our locker for our slip. I tried plugging into the other one last night, and the light remained on. We'll talk...

Great ideas Frank, I'll check on those!

Hello Ericonsites. So we've had this 34T for a full year now. In that time, somehow we managed to get the Reverse Polarity light to turn on, and can't get it to turn off. And now the latest, the DC panel is completely dead. The amp meter next to the panel was reading dead batteries, so we took...