Wanted 32-3 or 32-200 ( California)

[K2MSmith]

Looking for a well-maintained boat in good condition for single handed sailing (maybe refit for transpac 2022 ? ) . I have a preference for Bay Area, but will consider southern CA as I’m down there once per month . A good 34 not out of the question if the right boat came along ..

 

[rbonilla]

Looking for a well-maintained boat in good condition for single handed sailing (maybe refit for transpac 2022 ? ) . I have a preference for Bay Area, but will consider southern CA as I’m down there once per month . A good 34 not out of the question if the right boat came along ..

I have a beautiful 87 E32 in front of West Marine store - Seal Beach Ca...fs: $29k firm...exceptional gear/condition ++ cheers..Richard / Colorado

 

[rbonilla]

a few shots

 

[Mark F]

Hi Richard, 32-3 or 32-200?

 

[rbonilla]

Hi Richard, 32-3 or 32-200?

let's see Mark...It is a 1987 32-3 .. here is the serial number...and, a few more shots..
ERY 3273 8F 787 .. she is slipped in front of the West Marine Store - Seal Beach / 1266

 

[Loren Beach]

Love your pictures!
Stuck at home, and outside it's 45 degrees and drizzling.....
(sigh)

 

[nquigley]

I really like the unvarnished saloon floor. Do you have a bigger picture showing more of the floor? Did you do that job?
It's on my near-term project list.

 

[rbonilla]

I really like the unvarnished saloon floor. Do you have a bigger picture showing more of the floor? Did you do that job?
It's on my near-term project list.

yea Traveller...let me see what I can dig up ++

 

[rbonilla]

some floor shots for ya ++

 

[nquigley]

Looks GREAT!
You weren't tempted to add a bilge inspection panel way forward, above the forward keel boat?
I've never understood why the factory essentially entombed that bolt. I know I can 'reach' it via the little tunnel in the forward-most port side saloon seat, but there's no way one could loosen or tighten the keel bolt through that hole.
Anyway, thanks for the pics. I didn't catch before that you made your own 'teak&holly' flooring instead of buying it ready-made. It looks great - well done!

 

[Dan Callen]

I really like the unvarnished saloon floor. Do you have a bigger picture showing more of the floor? Did you do that job?
It's on my near-term project list.

 

[goldenstate]

Hi Richard, 32-3 or 32-200?

Richard's boat is a 32-3.

 

[rbonilla]

yers, a 32-3...serial number - ERY 3273 8F 787

 

[rbonilla]

Looks GREAT!
You weren't tempted to add a bilge inspection panel way forward, above the forward keel boat?
I've never understood why the factory essentially entombed that bolt. I know I can 'reach' it via the little tunnel in the forward-most port side saloon seat, but there's no way one could loosen or tighten the keel bolt through that hole.
Anyway, thanks for the pics. I didn't catch before that you made your own 'teak&holly' flooring instead of buying it ready-made. It looks great - well done!