EGregerson
Member III
anyone have or know where i can get some scrap teak and holly flooring (other than ebay)? Just enuff to replace the bilge plates fore and aft of the mast in an e34.
teak and holly flooring
- Thread starter EGregerson
- Start date
Tom Metzger
Sustaining Partner
I have some 3/4" left over from when I replaced my cabin sole, but it doesn't match the original. The holly stripes are slightly less than 1/4". See picture below. Being under the table and having teak trim around it I doubt if it would be noticable.
Let me know the dimensions you need in an e-mail (no point in telling the whole world how badly you will be hosed).
If you don't have the dimensions handy I may have the old pieces, but it is too late now to look.
trmetzger at earthlink dot net
Let me know the dimensions you need in an e-mail (no point in telling the whole world how badly you will be hosed).
If you don't have the dimensions handy I may have the old pieces, but it is too late now to look.trmetzger at earthlink dot net
Attachments
-
T & H old-new .jpg
Last edited:
ted_reshetiloff
Contributing Partner
I have some as well and am in Annapolis. Let me know your dimensions.
I also have a bunch of scraps left over from our complete cabin sole replacement a couple of years back. They are varying shapes and sizes and probably add up to nearly and entire 4 x 8' sheet altogether as well as a decent sized solid teak board (used for trim around edges).
I am in VT so let me know if anyone might be interested.
I am in VT so let me know if anyone might be interested.