Roller furler for E23

[Doug Bowers]

Singlehanded most of the time. Looking to install jib furler on E23. Certain some are better than others, pros... cons? Makes , models? Thanks

 

[toddster]

Do you trailer-sail the E23? I'm not sure how easy it is to rig a furler every time you step the mast?

Anyway, I ended up going with what the sailmaker recommended. (i.e. what he sells) Selden Furlex. I haven't had any problems with it, except I had to re-drill the hole in the bow tang because they don't seem to make pins the same size that they did in 1970.

If you wait until the Portland boat show in January, most of the shops will offer "boat show discounts." I got mine from Dale Waagmeester, on Alberta in Portland.

 

[Frank Langer]

My Harken furler has been problem-free despite being an older model. I think they have a good reputation.
If you are trailering alot, the CDI flexible furler is quite forgiving and has worked very well for a friend who trailers his boat.
Frank

 

[davisr]

Here's how I installed the Schaefer Snapfurl CF-700 on my Ericson 25. Quality aluminum and stainless steel drum. Flexible PVC. Made for those who step and unstep their masts for trailering.

Roscoe

http://www.ericson25.com/2015/07/rigging-standing-roller-furler-schaefer.html

 

[Doug Bowers]

Since I use 3 different jibs a downhaul will be the way to go.