That looks really sweet. Did you have to modify the engine stringers?I fitted a Yanmar 2YM15 on Trithena (Ericson 27) a couple of years ago and its a lovely little engine & easy to install. Also upgraded to a flexible coupling and PSS dripless seal at the same time which made for a neat installation and started up first time out of the box! I've no hesitation in recommending this motor
Thanks Alan, Motor came with new engine mounts so I made two flat plates to take new mounts and these bolted down using old holes. Very little difference for alignment really so this was sorted with some shims and on the flexible coupling.That looks really sweet. Did you have to modify the engine stringers?
Hello Loren, Its fairly quite with just the original insulation & the box in place but you do hear it running - a typical small HP diesel twin.Very Tidy installation!
Is it pretty quiet w/o the usual foil-face foam sound insulation?
Outstanding! Getting the geometry right can often be quite a pain.Thanks Alan, Motor came with new engine mounts so I made two flat plates to take new mounts and these bolted down using old holes. Very little difference for alignment really so this was sorted with some shims and on the flexible coupling.