Raritan toilet leak

[gabosifat]

Hi everyone,

Just rebuilt my Raritan toilet (PHII) only to find the fitting on the back of the bowl where the water comes in is leaking. Not sure how the fitting was installed on the porcelin originally as it must have a flange on the inside of the porcelin.

Would appreciate any experience and advice.

Many thanks,
Steve Gabbott
E35/3
Silent Dancer

 

[Tom Metzger]

Steve - I think I would call Raritan and talk to them about it. They have been very cooperative when I've talked to them. 856-825-4900

I think you are looking for the "spud Assembly" part #1236AW. It is pictured on:

http://www.raritaneng.com/pdf_files/...eadIIv0702.pdf

It's called out in the parts list for the PH II bowl, but not shown:

http://www.raritaneng.com/pdf_files/...Ephiiv0303.pdf

I hope this helps. Let us know.

 

[gabosifat]

Thanks Tom,

From the exploded diagram it looks as though it has two straight sides so I'm guessing the bowl must have a straight sided hole so it slips in. Will talk to my Marine store and order.

Many thanks
Steve