There is so much bilge that cannot be accessed on the 35-2 that its driving me crazy. I have pulled the A4 and cut some of the sole out. I cleaned up as much as i could and then when i went to the boat yesterday the bilge was full of nasty oily water. The leak was from the gas fill plate in the cockpit, i re-bed it so that shouldnt happen any more but it seems there was a lot of gunk between the fuel tank and the first access point. i shot a hose down there to try and loosen up any sediment but that surely isnt a propper clean. it also made me think how much gunk there is up in the forward sections that i cant access. I was thinking about shooting the power washer everywhere i could to loosen things up and then fill the bilge with water and some kind of bilge cleaner and letting it sitt for a while. I want to clean it right so that while sailing i'm not slushing around more and more oil and gunk in the bilge. the bilge is almost completely free of all previous tubing/wirind/other obstructions that were routed through it. any advice here would be extremely helpful. thanks