Need an Ericson 30-2 outboard rudder

[Tamott7]

Hello,
Long story short, grounded, tow boat US spun me around and snapped my ruder in half just above the lower gudgeon. Anyone know where I might find a replacement rudder? Thanks,

Tom
727-492-7133

 

[Shelman]

Many of the Ericson Rudders were made by Foss Foam in California. They now have a branch in Florida. Id Give them a quick call and see if they have your molds.

http://newrudders.com/

 

[Loren Beach]

Many of the Ericson Rudders were made by Foss Foam in California. They now have a branch in Florida. Id Give them a quick call and see if they have your molds.

http://newrudders.com/

Yup, good suggestion. I would also check with FinCo. http://www.fincofab.com/rudders.php

Best of luck to you.

Loren

 

[Tom Metzger]

Many of the Ericson Rudders were made by Foss Foam in California. They now have a branch in Florida. Id Give them a quick call and see if they have your molds.

http://newrudders.com/

The last I knew, the Foss Foam company in Florida is a completely separate company from the Foss Foam in California that built Ericson rudders.

 

[Alan Gomes]

The last I knew, the Foss Foam company in Florida is a completely separate company from the Foss Foam in California that built Ericson rudders.

This is correct.

 

[Tamott7]

This is correct.

Thanks all for the valuable responses. Have contacted Foss foam and they do not have mold. Seeing if other rudders on hand might be retrofitted.