juneausailin
Member II
Hi all, need some help/advice here. Have an 84 E38 with a Kenyon mast and am trying to install a mast mount radome. There's not really a conduit in the mast that I can discern for running cables in. I think there is a track at the aft side of the mast which the nav light wiring is running through which I could possibly tap into but above the first spreader I'm not really sure where I would drill a hole in the mast to make this happen.
I took the steaming light off and there is a bit of conduit running fore to aft that those wires run through but it seems to be a deadend at the aft side of the conduit, as in there might be a tiny junction box type deal there which is preventing me from running the radome cable all the way through and down the back side of the mast..
Any suggestions/ideas would be greatly appreciated..
Thank you,
David
I took the steaming light off and there is a bit of conduit running fore to aft that those wires run through but it seems to be a deadend at the aft side of the conduit, as in there might be a tiny junction box type deal there which is preventing me from running the radome cable all the way through and down the back side of the mast..
Any suggestions/ideas would be greatly appreciated..
Thank you,
David