CWM
Chuck
These photos show the city pressure water system setup on my 1973 E27.
Noteworthy Components used:
50 psi pressure regulator.
Only threaded fittings (no clamped hoses).
Hose used has SS sheathing ("burst proof").
Manual valve between the dock box hydrant hose and the pressure regulator; this is visible in one of the photos and is for convenience.
Since bottled water will be used when sailing, I removed the water tank, and cut a hole in the bulkhead for easy access to the storage area under the vee berth; this is visible in one of the photos.
Hopefully, this will give some ideas to other boat owners.
Noteworthy Components used:
50 psi pressure regulator.
Only threaded fittings (no clamped hoses).
Hose used has SS sheathing ("burst proof").
Manual valve between the dock box hydrant hose and the pressure regulator; this is visible in one of the photos and is for convenience.
Since bottled water will be used when sailing, I removed the water tank, and cut a hole in the bulkhead for easy access to the storage area under the vee berth; this is visible in one of the photos.
Hopefully, this will give some ideas to other boat owners.