Recent content by RKlemm

Yes, I've seen that profile. I went with a semi rigid rail with Insert. I sealed the face with 4200 and drove the screws in with butyl tape. It's not original to the style but neither are my race sails and electronics. Thank for the information

I have a set from a 32-3. JIB and Main. They are original I think. Still in great shape. I upgraded to UK cruising/racing sails a few years ago. I have no idea what they are worth. No tears, we'll taken care of.

Taco V21-9602. It's the closest I can find that covers the lip. It's not perfect but what is?

I have rub rail from a 1987 32-3. Cut into 8' sections. 31' is clean no bends, maybe 25' with some bends. I'll get that info if someone needs more than 31'. I can send everything if you want to try to take out the damaged area. Your call. I'm currently replacing all of it with a more robust...

I have a set of sails off of a 32-3. We upgraded and haven't even looked at them. That are in good condition, no tears.

Hey all, just coming into this thread. I have substantial damage on my Port rubrail. 85' 32-3. Got tangled up on a sea wall, the sea wall won. I need To replace the entire rail. The rail mount has about a 3/8" protrusion where the screws drive into. I've seen where some remove the protrusion...

Eric, I bought a solar panel with a trickle charger built in on Amazon for about $60. I mount it to the rear rail and run it all winter. You might need a reverse pole adapter. I bought one just in case. My batteries remain 100% all season and they stay in the boat.

I have a 86, 32-2 where I get excessive water in the bilge when on dry dock over the winter. Yesterday I drained about 5 gallons. Over the course of the winter, I'll do this a couple times if it's not frozen. Can that much water come down the mast? I don't usually cover it. But that's not out...

Hi, we just pulled our boat for the season. I have an 85 E32-3. We played tag with the dock and bent the aluminum rub rail. I was told that you can’t get that profile anymore and will need to replace the entire rail. The profile is a D without the vertical leg. So you have any contact info for...

I have a 85 E32-3 with a universal M25 I've been digging around the engine compartment and see the shaft packing gland needs some TLC. the nut, retainer nut, shaft need a good cleaning. I'd like to replace the rubber hose but don't know the diameter of the fiberglass shaft tube. So two part...

New to the site. Have a 1985 E32-2 we bought last Aug. Trying to be a good husband and help out with the sewing of canvas...:) I burnt up my wives Singer.:mad:.mmmyeah..not good. It's now fixed and since then I've purchased a Sailrite heavy duty sewing machine. I've fixed a few odds and ends but...

Boat Quote My Wife and I just bought a 85 E32-3 for $25,000 late in August. This boat was in above average condition. Well taken care of. We had to replace the refrigerator and the Hot water heater Is questionable. The boat was dry docked for about two years. Sails are in OK condition and...