I am looking for an injection fuel pump for my model 18 Universal. Anybody parting out an engine? I think the part no. is 299525 according to TOAD Marine.
I’m thinking of changing from my two blade prop to a Campbell Sailer three blade, 12” x 7.5”. It’s on my 1983 30+ Universal model 18. Anybody done this?
I have hull 664 1984 30+. I have a standard two blade prop. I could sure use a little more power to windward or even a little more speed. Would changing to a three blade help me? Size? Suggestions?
Hard over
On my wheel pilot, I hit the 1 and 10 degree buttons simultaneously and it goes 90 degrees to come about. No need to hit the 10 degrees 9 times. Yours doesn’t?
BTW, I love your YouTube channel. I’m a subscriber.
Does anyone have a boneyard that might include an exhaust manifold for a model 18 Universal? No longer manufactured and all the other suppliers have nothing. I'm appealing to anyone who may have an engine they are parting out. I can get one special made but over a grand.
gaskets
I did a valve job and now I am having hell finding the upper gasket set part no. 256837 and head shim part no. 301119. TOAD is helpful but backordered. I need a source for Model 18 Universal parts. Any suggestions?
Thanks Frank, is the Twin Disc 340MG you mention the same as the Technodrive 40M? Sound Marine says all I have to do is place shims under motor to raise 1/4". Did you replace the damper plate? The Universal manual shows part 300315 for damper plate and price is $750. Very high. Thanks,
My Universal model 18 (Ericson 30+) runs great in neutral with high revs (no tach) and no smoke and very smooth. When I put it in gear the maximum revs drop to about half and I get black smoke and it spits unburned diesel out of the exhaust. I suspect the trans is gone since it was run without...
Thnking of sellng the Swede. Would be a project boat. Just put 6k into the engine but needs some work. Nice electronics, autopilot, depth and speed sea talk. Sails beautifully and solid. Sail it every weekend but want to change. South Texas
lschill@rgv.rr.com
Amazing
Well, I installed the "new" fluxgate I bought from Defender and it did the same thing, so I figured it must be the control head. I sent the control head and fluxgate to Derek at Breakwater Marine in Webster, Tx. and he checked it out and said nothing wrong with the control head...
I have ordered a new compass unit and am hoping I can use the same wiring to hook up. Should be here the end of this week and install this weekend. We will see!
My Autohelm ST4000 wheelpilot puts out incorrect compass headings. It hasn't been used in quite a while and I thought maybe the compass was stuck and might free up after some use but that has not happened. It does change readings but never correct. I have recalibrated but doesn't help. When...
Engine Control Panel
I would be interested in the main hatch, rub rail corners and especially the engine control panel (outside) my e-mail is lschill@rgv.rr.com Maybe more items as I am re-working my '84 E-30+