LameBMX's latest activity
-
LameBMX reacted to tiredold's post in the thread Navtec hydraulic backstay adjuster leaking with
Like.
***************UPDATE*****************UPDATE************** After five years I started to develop a leak around the rod again. Since the... -
LameBMX reacted to Loren Beach's post in the thread Seepage at keel bolts E 38-200 (E 381) recurring issue? with Like.
Sounds reasonable enough, but not like our own experience. For us the yard lifted the boat off of the keel with the travel lift, and...
-
Kenneth is spot on. I have had a wire come loose and short circuit on the engine block, and then melt its way through the starter...
-
That’s an in-line ATC fuse holder (Loren beat me to it…..)
-
My guess is that it's a fuse holder for a blade type of fuse.
-
As others said, we are not NASA or building airplanes here. In those situations I cut the original wire and use a plain butt splice...
-
1) Probably not 2) Possibly try snapping the halyard and see if you can get it to jump back on the sheave. Are you able to pull the...
-
LameBMX replied to the thread Thought on spinnaker pole lift?.she is a fractional rig. though there is a good point about chafe, as my jib halyard has an exposed sheave pin, meaning it would exit...
-
Hi All. I'm am looking to add a spinnaker pole (and tender) lift on my mast. My current thoughts are installing a mast exit plate down...
-
-
LameBMX reacted to Christian Williams's post in the thread Mounting the Last Resort on the E32-3 Sea Hood with Like.
Well, OK, but the emergencies I envision aren't like ejecting from an F-15. Usually when the boat is filling with water there's time...
-
LameBMX reacted to peaman's post in the thread Mounting the Last Resort on the E32-3 Sea Hood with Like.
I like this approach. Maybe a nut welded to the underside of a stainless plate and then through-tapped, with that plate then epoxied to...
-
LameBMX reacted to Christian Williams's post in the thread First Time Spinnaker Setup on 35-2 with Like.
Bob is right on, in my opinion. But since you're just getting into the world of sym spinnakers, why not give it a try before spending...
