wheel

  1. vanilladuck

    40" wheel for 1985 E32-3

    Like a lot other similar boats, there is currently a Yacht Specialities destroyer wheel on my Ericson 32-3 mounted on an Edson pedestal. As I'm contemplating adding an auto-pilot, I'm also thinking it's a good time for a wheel upgrade. The current wheel measures to just under 36" OD. And I'm...
  2. Shadsboat

    42" Destroyer wheel with 1" hub

    Have an extra wheel since replacing with folding version. This is a really nice stainless wheel with an excellent rope wrap. Has a 1"hub with spacer washer. First $100 and U arrange pick-up.
  3. Christian Williams

    Yacht Specialties Pedestal Disassembly, with Photos [Master Thread]

    (Yacht Specialties/Merriman binnacle steering manual: https://ericsonyachts.org/ie/resources/merriman-binnacle-catalog.187/ ) ( Edson pedestals: https://backwinded.wordpress.com/2015/12/07/replacing-the-diesel-engines-throttle-shift-and-stop-cables/ also Edson 335 pedestal with Yanmar 3YM30...
  4. Christian Williams

    Yacht Specialties Installation Manual Available

    I discovered I have the original Yacht Specialties Steering Manual, which covers installation, chain, cables, quadrant, stops, Morse cable control head attachments, and so on in detail. YS is long out of business but was the OE manufacturer for many Ericsons. See below. A better version now...
  5. S

    Ericson 30-2 (transom rudder) for sale in SF

    Ericson 30-2 (1979) with transom-hung rudder and wheel steering for sale in San Francisco. Good condition - ready to sail. Inboard Yanmar diesel (rebuilt this year); double spreader rig; North sails - less than two years old; self-tailing winches; spinnaker with pole and lines; Harken roller...
  6. B

    Wheel feels sticky while underway

    While I'm underway in my E29 it feels like my rudder is sticky. At the dock it feels free and easy but after a particularly big run in front of a twenty knot blow and accompanying seas all of the sudden it feels like something is wrong. Everything looks fine at the top of the rudder post where...
  7. M

    Free wheel prop or lock it?

    I'm a new owner of a 1987 Ericson 32. I've noticed in the manual that it says to "not" sail the boat with the transmission in forward gear. My question is, does this mean the recommendation is to sail in neutral or reverse? I know that there is a lot less drag on the boat if I sail in neutral...
  8. J

    Bent Wheel

    Our "new to us" E35III has the 42" wheel. I can tell its bent. It work fine, but as I rotate the wheel it puts more or less pressure on the wheel mounted Autohelm ST4000. The flex or deflection appears to be about 1/2" at its maximum. The AP works fine. What do you think? Is there a way...
  9. S

    sail & wheel cover

    main sail cover (14ft x 3ft 9in) and wheel cover (3ft tall x 2 1/2ft) and additional cover (9ft x 3ft). $10 for all 3. stvsem@gmail.com 317-445-2556
  10. P

    Pull-Pull Conduit for wheel steering

    I have a 1981 E 28+ and need to replace part the wheel steering components. Are there any discount marine hardware sources that sell Edson parts? I need the 6' Pull-Pull conduit for my steering cable. Any suggestions as to discount source for the Edson Parts?? Thanks, Phil Schofield...
  11. toddbrsd

    Main Halyard to Cockpit, E-27 (Wheel)

    Looking for some advice, pictures even better. I am considering modification to my E-27, with wheel steering, to bring the main halyard aft for single handing. My initial thought was to buy a winch and locate it within reach, but not sure how necessary that is. I am fairly new to sailing and...
  12. WBurgner

    Retaining Ring - Yacht Specialties Wheel

    Some how the retaining ring forward of my wheel has gone missing. This is the spring clip that the wheel is pressed against when the retaining nut is tightened. Does anyone know the proper size or a replacement source? The axle shaft is 1" diameter. Does Edson have something similar in their...
  13. P

    Stiff wheel steering on Ericson 28+

    Greetings, I have a 1981 Ericson 28+ with wheel steering, that has been very stiff, as in difficult to steer. Feels sort of like the steering lock is on but it's not? It has been this way since I bought it used, and I have just dealt with it till now. I am getting ready to haul the...
  14. Keiffer

    E29 Pedestal and Wheel assemble

    I am looking for a wheel and pedestal assemble for a 1975 E29 bridge mounted. If anyone knows where I might be able to find one I would appreciate the info. Also, anyone who may have installed one any advice you have to share would be invaluable. Thanks Keiffer Atlanta, Georgia
  15. Gmilburn

    Cockpit Wheel Top Dead Center Marking

    Hi all, I want to renew my weaved line on my cockpit wheel that marks top dead center for the rudder (probably not the right term--but I'm hopeful that you know what I mean). The old marker was probably original with the boat--and appears to have been "woven" directly onto the wheel. Anyone...
  16. W

    E 27 Conversion Tiller to Wheel WTB Tiller/Rudder Head

    Anyone out there have tiller parts after converting to wheel on an E 27???? Could really use tiller/rudder head for rebuild on E 23-1
  17. T

    St4000+ Raymarine Wheel pilot problem installing bearing cage

    We hit heavy sea's a month ago, somehow the wheel pilot got engaged and the wheel was turned resulting in the drive ring cracking and breaking, ball bearings popped out everywhere. I have gone through the owners handbook and can't figure out how to get the bearings into their cage and then into...
  18. mherrcat

    What is this on my wheel drive?

    There is no mention of this that I can find in the Autopilot installation instructions or operating manual. It looks like it is for some kind of adjustment, judging from the graduated markings around the edge.
  19. L

    Speaking of Wheel Pilots

    I'm trying to figure out how to install a MK II Wheel drive (S1 Wheel pilot) with a rudder position sensor on my 1988 E 32-200. The problem is the RPS. Has anyone else figured out how to install the RPS over the quadrant? It looks like I am going to have to build a right angle on the aft side of...
  20. L

    Wheel Pilot Install

    I'm getting ready to install a Raymarine X-5 Wheel Pilot on my 35-3. It would be helpful to know from others who have done this where they placed the fluxgate compass and the course computer. For my boat, I think the best location for the course computer is in the starboard cockpit locker, near...
  21. A

    E28 Wheel Upsize

    I am considering upsizing the steering wheel on my '86 E28. The current wheel is a 28" diameter, and I find it difficult to steer from a position where I can see the telltales, waves, other boats, etc. Has anyone put on a bigger wheel? What size works? I am considering going to a 36" or...
  22. Afrakes

    E-27 Wheel Conversion

    I'm considering converting my E-27 from tiller to wheel steering. Has anyone has any experience with this kind of project?
  23. Q

    E-39 wheel and pedestal for sale

    I'm converting to tiller steering, so am selling the whole kit and caboodle - pedestal, wheel, binnacle compass, cables, blocks, rudder post quadrant. John 510-525-6200
  24. WhiteNoise

    Wheel to tiller

    I have been thinking for some time now that the 30+ was better designed as a tiller boat, only to find out recently that the wheel was an option and it was indeed tiller driven in it's standard configuration. My pedestal has seen better days and I would rather convert than replace or have parts...
  25. S

    Wheel location -- aft or forward

    The E35-II has the wheel way aft, behind a barrier. This gets the helmsman out of the way -- but isolated from the rest of the boat. It also makes access cumbersome. Other boats, like the E39 (It t think) and the Pearson 35 put the wheel way forward -- right at the companionway. This gets...
  26. E

    E30-II wheel steering access.

    Hi, I am about to replace the wire rope portion of my wheel steering. Has anyone done this? I assume my boat is very similar to the E30+. I need to gain access to the area below the pedestal. :egrin:When I go inside the cockpit locker on the port side I cannot access the area directly below...
  27. O

    S1 wheel pilot/rudder sensor/E35II

    Hi everyone, I know this question has been asked before. I've read the other threads regarding this issue but..... I'm still scared lost and lonely. Can any one help me with some pics and or advice?
  28. S

    Ebay Wheel Helm By Yacht Specialties

    Rough but available - starting bid $300 - complete with idlers & plate. http://cgi.ebay.com/ebaymotors/WHEEL-HELM-FROM-TILLER-CONVERSION-BY-YACHT-SPECIALTIES_W0QQcmdZViewItemQQcategoryZ31281QQihZ005QQitemZ150235068833QQrdZ1QQsspagenameZWDVW
  29. S

    ST4000 (MKII?) Wheel Motor exploded parts diagram request

    OK - The ST4000 (I think MkII) Electrical connector broke off. The PO had broken it, and we finished it off last weekend. I've got two pieces, the threads are 90% broken off in a nice ring. I'll replace it, unless it is $100. I could glue it, but is that sufficient? The Raymarine website lists...
  30. WBurgner

    E38 Wheel Removal

    I tried to remove the Yacht Specialties wheel this afternoon and could not get it to budge. I thought that removal of the retaining nut would allow it to slide off. I see that there is a key on the shaft. If anyone has pulled the wheel I would appreciate a little info on how this all goes...
  31. H

    Wheel wrap

    Hi all I don't know if I am posting this in the right place or not but here goes. I have an E-35 Mk II with a 40" wheel. Here in southwest British Columbia it gets very cold on the hands during our Fall Winter and Spring racing seasons. My question is this...there are lots of web sites...
  32. ron7546

    Raymarine S1 wheel pilot

    In the process adding Raymarine S1 wheel pilot on my E27 . Would any member happen to have info or photos regarding installation of the "rudder position sensor".I have all mounting specs - - - just would like a " heads up" from someone who has actually installed a sensor on an E27 in the little...
  33. L

    Teak table & 38" wheel for sale

    Hi everyone, I am trying to make a little more room in our cockpit. So I am selling the 38" s.s. wheel, eight spokes, very good condition. Also for sale is the original Ericson teak table 16.5" wide, 19" long, with four places for drinks. Both were original equipment on our 1990 E28. The...
  34. K

    36" Yacht Specialties destroyer wheel for sale

    36" Yacht Specialties original equipment destroyer wheel from 1989 Ericson 38-200 for sale. Straight hub, fits 1" shaft. Excellent condition. Purchased larger wheel. Best offer. Larry Koch Kolika
  35. treilley

    Folding Wheel

    I was in my local WM store the other day and I saw the new display with the Lewmar folding wheel. What a nice addition. I think I might need one of these soon:egrin:. Anyway, my current wheel is 36" with no dish. I have always thought I would get a larger wheel if I ever upgraded. Does...
  36. D

    Need Steering Parts for 1972 E32-2 (wheel & quadrant)

    I have one of the early Ericson 32s that had a tiller instead of a wheel. I want to convert it to a wheel but am having trouble finding the parts. I have the pedestal, but still need a wheel and a quadrant. If you either of those parts and are willing to part with it, please let me know how...
  37. G

    I saw an odd wheel today.

    All, I saw a very strange ships wheel today on a newer Hunter 30 or 31. The best way to describe it would be to sat that it looks like a stainless tubing X with a normal radius curve on the top and bottom of the X. Then there are two large diameter stubs coming out from the hub at 3 o'clock...
  38. P

    Wheel Brake 1985 E 35-3

    Does anyone know where I can find a wheel brake assembly for the merrimen pedestal? It was originally sold by Yacht Specialties Company, Inc out of California. Can find nothing on the internet.
  39. K

    Steering Wheel

    Since I have replaced ours with a Lewmar folding wheel, I would like to sell the Stainless steel, Yacht Specialty, 36" with a 1" straight shaft and key. I had to use the old nut for the new wheel. I have no idea how much to ask for this. Excellent condition, any ideas out there? I can send...
  40. G

    Knotmeter Paddle Wheel Replacement

    The knotmeter paddle wheel on my E27 is located on the portside of the bow. The little wheel is shot (missing its paddles) and needs to be replaced. The thru hull is a white plastic that is translucent (gives me extra light when I'm combing through the bow locker under the V berth) and I'm not...
  41. E

    WANTED: E29 - wheel steering - Atomic 4

    WANTED: E29 in excellent condition - wheel steering - Atomic 4. Please email me at mkelly@visualmovement.com Thanks.
  42. J

    Steering Wheel Cover

    Hi Folks: I'm in need of recovering my steering wheel. Currently, I have it covered with three strand cotton twine using a (I think this is the correct name for it) french weave. It creates a spiral effect. Center rudder is maked with a Turk's Head. I'd like to remove this as it has...
  43. J

    E35 II wheel steering problem

    I have a 1972 E35 II. Recently on a trip back from Catalina I lost the wheel steering. When I got a chance to investigate, I found two steel plates, bedded to the hull and standing vertically, providing the backing for turning blocks for the steering. One of these plates had rusted through and...
  44. Mikebat

    Wheel Pilot

    Over in the tiller pilot thread, there were some praises for the Simrad tiller pilots. I wonder if that same praise can be carried over to the wheel pilot units? The WP32 is the model I am looking at. Anybody have any experience with it? I've considered and ruled out a below-decks pilot...
  45. Mindscape

    42 inch YS wheel - replacing with 36 inch?

    I've got a 42 inch YS wheel on my 1985 32-3. I've thought about replacing it with a slightly smaller wheel to make moving about the cockpit a little easier. I sail solo quite a bit and this would make life a little easier. My thought was a 36 inch wheel. Does anyone know if replacement...
  46. 1973E29 TUG

    E29 Tiller to Wheel Conversion

    I recently purchased a 1973 E29 with a tiller and plan on doing some longer distance cruising and like the ease of wheel steering. I have thought about converting the tiller to a pedestal/wheel. What year/hull# did they start building the 29 with a wheel? Has anyone gone through converting...
  47. S

    Wanted Pedestal & Wheel E27

    I am looking for a used pedestal/wheel steering setup for my '74 E27. Contact Steve at steve@paperlesslawoffice.com if you have one for sale. Thanks.
  48. Mindscape

    32-3 - Leather cover for the YS Wheel

    Wondered if anyone has covered a wheel with leather. I'm considering it on my 1985 32-3. I believe it's a Yacht Specialties wheel, 42 inches in diamater. I looked at some info from a company called boatleather and it looks pretty simple, but I'm always leary so anyone with experience let me...
  49. P

    Wanted Used Wheel Steering for a E27

    I am looking for a steering wheel & pedistal assembly and related hardware to change an E27 From tiller to wheel. Any comments about doing change would be appreciated.
  50. jamescio

    Wheel Steering/Ericson 29

    Has anyone every installed an Edson Wheel Steering system on an Ericson 29. How big a problem is it? Is it worth doing ?
  51. K

    Applying Coachwhipping to the Yacht Specialities Wheel

    I'm working up a "one way to do it" article. I didn't take any photos during the process, so I'm going to demonstrate on a friends wheel
  52. R

    Play in Edson wheel

    I have a '86 Ericson 30+ with an Edson wheel. Lately, I've notice a good 4 inches or more of play in the wheel. Any ideas as to what would cause this looseness in the steering? Thanks. - Rob
  53. C

    Help wheel installation

    I have owned my 1978 Ericson 27 for about two months. I want to replace the tiller with wheel steering. It seems that the contractors l have called are either to busy or not interested as they have not called back. If anyone has had experience with installation of a wheel to replace the rudder l...
  54. B

    35-2 Wheel Steering Adjustment

    Has any one adjusted the play out of the wheel steering on this boat? If so I'm looking for pointers. Thanks, Brett
Top