• Untitled Document

    Join us on March 29rd, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

e32

  1. vanilladuck

    Mounting the Last Resort on the E32-3 Sea Hood

    On the long list of preparations for cruising the Channel Islands and Hawaii from San Francisco is the installation of a life raft. I'm not really fond of hanging it off the stern pulpit. The next logical spot is amidships on the sea hood (aka "the turtle shell", as I call it). Below is a photo...
  2. A Temporary Janky Tanky

    E32-3 A Temporary Janky Tanky

    SV Rumour had a leak in her diesel tank. Not surprising after 3/16" aluminum sat on and rubbed and vibrated against the raw fiberglass hull for about 38 years. You'll find quite a few threads in the forums here with folks finding pinhole leaks in their aging tanks. Taking the tank out was a...
  3. Phasing in a New 12V DC System

    E32-3 Phasing in a New 12V DC System

    Preface When considering a leak in a sailboat's diesel tank, the first step is to rebuild the core of the 12V DC system. Wait... did I already lose you? You might be familiar with the urge to chain projects together. When you remove the diesel tank on some of our boats, the primary 1/0 AWG...
  4. The Tiny Hole Theory: Self-priming Rule 800 Bilge Pump

    E32-3 The Tiny Hole Theory: Self-priming Rule 800 Bilge Pump

    Date: March 2023 With the number of rain storms coming through the SF Bay area recently, it's given me a good opportunity to see how the bilge pumps on SV Rumour are working -- and not. I realized a while ago that the shower bilge wasn't automatically pumping. No big deal -- water never goes...
  5. vanilladuck

    Tiny Hole Theory: Defeating Airlock on a Rule 800 w/Check Valve

    With the number of rain storms coming through the SF Bay area recently, it's given me a good opportunity to see how the bilge pumps on SV Rumour are working -- and not. I realized a while ago that the shower bilge wasn't automatically pumping. No big deal -- water never goes down the shower...
  6. vanilladuck

    Water and the cabin sole

    Like most of us, I have water which regularly enters the boat through the mast on my E32-3. There is no gutter around the mast step so the water runs across the cabin sole to the starboard side of the boat and seeps into the edge of the flooring where it meets the fiberglass gelcoat at the base...
  7. vanilladuck

    What To Do When the Start Line is Becalmed at the Beer Can Race

  8. The Art of Sailing and Dating Romance

    E32-3 The Art of Sailing and Dating Romance

    Sail date: June 18, 2021 The Art of Sailing and Dating Romance I had Friday off work and was sailing from Pt. Richmond to San Francisco. The plan was to pickup The Miss at St. Francis Yacht Club and sail back to Richmond for the weekend. We were both excited -- this was our first time doing...
  9. vanilladuck

    40" wheel for 1985 E32-3

    Like a lot other similar boats, there is currently a Yacht Specialities destroyer wheel on my Ericson 32-3 mounted on an Edson pedestal. As I'm contemplating adding an auto-pilot, I'm also thinking it's a good time for a wheel upgrade. The current wheel measures to just under 36" OD. And I'm...
  10. S

    Wanted: Ericson E32, E34, E35 near Lake Erie & Lake Ontario

    Hello, My first post here...I've been reading this site to learn more about Ericsons, general boat maintenance, etc. while searching for my 1st boat. I moved to Pittsburgh area after living in Sausalito, CA for many years (thus most my sailing in the SF Bay area), but my home port is Erie, PA...
  11. Fuel System Refit with a Racor 500

    E32-3 Fuel System Refit with a Racor 500

    Intro When I started thinking about the fuel system on Rumour, I realized there were a few things to consider. I heard a number of recommendations to remove the old metal fuel supply lines and check or replace the old Racor 200 series primary fuel filter/water separator assembly. Both are...
  12. vanilladuck

    Installing a new Racor 500 on an E32

    Refitting the fuel supply system on Rumour this weekend and trying to figure out how to mount the new Racor 500 in the same location as the old Racor 220R -- behind the engine just below the sliding board in the aft quarter-berth. Here's the current layout of primary filter and pump: Curious...
  13. vanilladuck

    Renaming an Ericson 32 [video]

    I purchased my 1985 Ericson 32-3 last summer and, once I realized the pandemic was not going to end anytime soon, decided to have a small socially distant gathering of friends to rename the boat. Technically, I was keeping the name the PO had given the boat. They had never re-christened the...
  14. Inexpensive & Uncomplicated Binnacle Compass Light Upgrade

    E32-3 Inexpensive & Uncomplicated Binnacle Compass Light Upgrade

    One day I lifted off the cover from the compass on Rumour to look at the wheel brake mechanism. While I had it open I noticed there were two electrical leads completely disconnected and close to making contact. While it makes perfect sense I never thought there would be a compass light on the...
  15. vanilladuck

    E32 Mainsheet Refit, 4:1 or 5:1? or...

    My 1985 Ericson 32-3 has a 3:1 mainsheet which runs under the boom and down/back through the deck organizer to a winch on the starboard cabintop -- pretty standard I think. I'm interested in converting this into a 4:1 or 5:1. Thanks to @gfilipi, who directed me to Harken's mainsheet system...
  16. vanilladuck

    Galvanic Isolator mounting location E32-3

    Installing a galvanic isolator on Rumour, an Ericson 32-3: Any suggestions from experience, word of mouth, or hearsay on where to mount this thing? Instructions say to keep it in a dry ventilated area and it only needs to be connected inline of the green grounding conductor from the shore...
  17. vanilladuck

    YAHOO! Yet Another Haul Out Outline

    Having just had the E32-3 for a few months, I've only sailed her a handful of times and fixed a few things (eg. Boom Rehab and Stuffing Box, etc). After officially re-christening the boat this weekend, we took her out for a sunset sail around the SF Bay and the main sail got stuck on the way...
  18. vanilladuck

    Stuffing Box & Packing Material Choices

    Context: About to adjust the stuffing box on the E32-3 as it's dripping a little too much for my, albeit novice, taste. A drip every 2-3 seconds at the dock and a few drips a second underway in forward gear. I'm reading that it should be no drips at the dock and a 2-6 drips per minute with the...
  19. vanilladuck

    E32 Boom/Gooseneck Fitment & Rehab

    tl;dr - Boom-to-gooseneck fitment was found to be loose. This thread is dedicated to the re-fitment of these pieces, as well as the cleanup and replacement of some frozen sheaves on the fitting at the end of the boom. --- A few days ago, I was replacing the reefing lines on my 1985 Ericson 32-3...
  20. NWER.2005 - 79.jpg

    NWER.2005 - 79.jpg

    Day sail on Saturday...
  21. S

    Looking for an Ericson 29 - 35 (BC or Wa preferred)

    Hello all, Just in case someone here is thinking of selling, we are looking for our first keelboat. We had an offer on a '76 E29 which got away from us, but are now re-evaluating our size and budget parameters. Having studied most of the Ericson models from 27 through 35 (I love the 38, but...
  22. Tarrymore

    Difference between a mid-80's e32 MK II and MKIII

    Hello all, first post here and new to Ericson. So inspired by Christian Williams' YouTube videos I think I may have found my choice for my first 32. I also might just hold his channel record for most replays haha. I searched the forum for a "Difference between the 32 MKII vs MKII" thread...
  23. Survey Says?

    Survey Says?

    I had looked at a bunch of boats, walking around on their decks, rocking back and forth checking for soft spots, scanning the rigging for rust, examining engines, but mostly just wandering around getting fixated on things that now I know don’t cost a lot of money or time to fix, and completely...
  24. R

    TAFG layout for a 1987 E-32

    I am trying to find a drawing, picture or anything that will show me the layout of the TAFG on my 1987 E32. I am trying to route a drain line for the AC unit under the V berth to the shower sump to keep the AC drain water out of the bilge. I am looking for a path. My cabin sole is glued down...
  25. B

    Need help to identify winch from E32

    Hello, I lost one of my winch pawls to the sea floor. The boat is a 1971 E32. The winch is located on the starboard side of the mast for raising the main sail. All other winches on the boat are Barlows, but this one does not have any markings and it is not a Barlow (says the guy who sells Barlow...
  26. C

    WANTED - E27-E32 any year - SOCAL Area

    Hey guys! Looking for an Ericson 27ft to 32ft (1970s-1990s) sailboat in okay condition. I would love to find a boat that has a running engine, solid hull, and dry bilge. I don't mind fixing cosmetic issues. I am a young sailor looking to get my first boat. I have chartered for the past season...
  27. P

    Hull # for 1988 E32

    I recently purchased ERY32827C888. I'd like to understand what the number means and also confirm that the vessel is indeed a 1988. Can anyone advise on this?
  28. rbonilla

    anyone know this E32 owner in the Bay Area?

    "Seascape - Ericson 32-3 - PHRF Non-Spinnaker - Michael Bender" .... anyone know Michael..?? I am interested in getting in touch with him regarding his E32 "Seascape"...a BIG thanx !! Richard / Colorado :egrin:
  29. G

    selling my beloved E32-III. Long Beach, CA

    Hey folks, I took a job in Michigan and have to sell my beloved E32 "Tui". Owning her has been a privilege; a wonderful boat built by a fantastic company. She's in pristine shape and I hope to find a conscientious owner to be her next caretaker. Check it out here...
  30. A

    E32 Scorpion Spreader Length?

    Just picked up an E32 Scorpion (project boat at this point) and the spreaders are missing. Anybody out there have a clue for the spreader length on these boats?
  31. D

    E 32-200 '88 Sail Plan Dimensions + Sailmaker Recommendations Appreciated

    Time to replace sails. Does anyone know whether the 32-200 has the Mk3 Tall Rig or the same as the 333? Does anyone have experience ordering replacement sails online? I am specifically looking for the specifications for 100% and 135% roller-furling headsails, but additional sail info also...
  32. R

    1978 E32 rudder post

    We have a E-32 with a leaking rudder post. Does anyone have any info on repairing it or know were I might find a manuel? It only leaks while underway but it appers to be a good bit. Thanks for any info.
  33. I

    Mast height for E-32

    Our 1974 E32 had all of the running and standing rigging replaced...about 3 years ago (before we bought it). The new mast is 42 feet high. That's just the mast - from the mast step to the mast head - does not include the fittings on the top. I have looked through the resource material on this...
  34. T

    Spreaders on a 1970 E-32

    Just about done refinishing the 32 and getting it ready to head for Oriental NC. Running new rigging it has the orginal wood spreaders. Has anyone had luck replacing them. Im thinking using Ash and seal with epoxy Or did someone have aluminum ones made? If so how much did it cost
  35. M

    E-32 rainwater leak- rubrail? headsail track?

    I'm trying to stop up a rainwater leak into the galley storage area on my 1976 E-32. I've rebedded the stanchions in the area and the only culprits left (that I can see) are the outboard headsail track and the rub rail.<O:p</O:p <O:p</O:p First: I don't see any signs of the sail track being...
  36. R

    Genoa track size on 76 E-32

    Could someone please verify for me the size of genoa track on rails. From Specification in Standard Equipment document for E-32 1972 is - 1 1/4 " stainless steel genoa track, my boat has aluminum track. I am not 100% sure exactly the measurements cause my boat is currently docked in Mexico and...
  37. Gmilburn

    E32 Sliding Hatch For Sale

    Hi all, I have a sliding hatch from an E-32 that I’m interesting in selling. I bought it from a friend that was parting out a E32 and I thought it might fit my E-29 or be relatively easy to cut down to fit. After receiving it, and taking a hard look at it—I will clearly not fit, and the cut...
  38. R

    76 E-32 needed 130% Mule Sail

    I needed 130% Mule for my 76 E32 with hanks, or Jib 230 - 250 sq ft Dacron 6 oz - 7.5 oz.in good condition.
  39. B

    1974 E32 for sale in Chino, CA

    Palmer P60 gas engine removed. Short-handed rigged cutter with steel cradle lying on the hard. Main & 120 furling genoa on Hood Sea Furl. West System barrier coat. New cushions & batteries. Pressure water, refrigeration, 12 &110v. electrical, wheel steering, adjustable running backstays, propane...
  40. D

    Hard-to-find E-32-3 1987. Standard Layout

    Selling "Siren" after 22 years of enjoying her. I have taken a second home in Boulder and just not getting her out as much anymore. New Sails, Only 650 hrs on Universal xp-25 diesel. It has some blemishes as you would expect for a boat this age but she is strong and sound and has always been...
  41. D

    Looking for new sails 87 e32

    Time to replace my sails. Would like to go with another 155% headsail again. Roller furling. Suggestions for best direction to go or any for sale? Thanks
  42. D

    '87 E-32 UNIV M-25XP losing coolant/ovr heat

    I am loosing coolant and overheating, no visable signs of loss and fresh h2o exhaust not showing to be exhausting coolant. Any suggestions of what is happening? Thanks:confused:
  43. R

    76 E-32 icebox insulation

    I have a question. Anyone here removed the icebox on 1972/78 - E-32/E35 to replace insulation. Removing the cabinet above the counter top is not a problem. What was involved to remove the counter top ? How it is attached to cabinet ?
  44. F

    E-32 owner wants info on E-38

    Hi there, I bought a 1985 E-32 shoal draft a year and a half ago and really love it. I h ave been extensively rebuildidng and upgrading it ever since. Racing it too. It just makes me feel good to be on her, or s pending the night, or entertaining. But we Vikings all know that feeling well...
  45. Spalding

    Need Mast for 69 e-32 HULL# 108

    some scoundels made off with my mast while it was in the yard so I am looking for a replacement any suggetions would be great! Also need tiller to rudder post hardware for same
  46. A

    Maint. Questions: '71 E-32

    1) I put in a bladder water tank the sink works great. The only issue is two it inflates big and pops up the access panel for a few days . The hand pump sink works initially due to the amount of air I guess than doesnt work any more any suggestions 2)The two large windows on each side of my...
  47. Matey

    Fresh water tank access E32

    I need to replace all my fresh water hoses. I traced them back to both ends of the lower aft sides of the tank. I'm assuming they tee in the middle. My problem is getting to the discharge fitting. The tank is a tight fit and the panels above are nicely screwed down and varnished over .. maybe...
  48. K

    E32 steel engine beds

    Atomic 4 wasn't taken care of by previous owner and a leak in the side plate rusted out the steel engine bed. Now I have to take out the remaining bed and build new ones. Has anyone been this fortunate? I am fairly good with epoxy but starting a job like this is totally new to me. I have all...
  49. rbonilla

    fs: e32

    nice little e32 fs in e bay this week...west coast - del rey - arounf $40k...looks like a shill bidding, but the boat looks ok.....:esad:
  50. T

    1975 E-32 For Sale - Larchmont, NY

    1975 E-32 - Larchmont, NY - SOLD Aug 2008 Boat was sold in August of 2008. Thanks Everyone. :egrin:
  51. G

    1971 HIN Location E32

    OK, I give up trying to find the HIN on this '71 Ericson 32. I've looked everwhere with no luck. Can anyone give me a hint where to look? It is definately not on the back of the transom. Thanks, Gene in Galveston
  52. S

    Engine access hatch E32

    After spending a couple of hours draped over my A4 v-drive changing the water pump impeller, and a few days dealing with an exhaust mainfold replacement last year, I've come to the conclusion that I need to make access MUCH easier!! A water tight hatch in the floor of the cockpit is the option...
  53. D

    E32 - Area under Hanging Locker

    I was cleaning out the hanging locker this spring and noticed that there is potentially a fair sized area under a plywood sheet. The end closes to the hull is fiberglassed in so I didn't take out the screws to look inside, so I'm wondering if anyone else has looked inside. Does anyone know if...
  54. G

    Auxillary Engine for E32

    I have a 1971 E32 I brought from auction. The Atomic 4 is seized and I'm considering replacing with deisel. Until then and to start sailing, I'm considering using an auxillary engine, i.e outboard, for the summer. What size motor should I be looking for and any other thoughts towards...
  55. B

    E32 vs E32

    A newbie question: What is the difference between E 32, E 32-200 and E32-300? I gather that the last 2 are newer models, but it isn't clear from the ads that I am reading. Thanks, Freeman
  56. D

    cutless bearing change on E-32

    how hard is it and what does it cost?
  57. C

    E-32 sails

    I looking for a good Main Sail and Head Sail for A 1971 E-32
  58. B

    1974 E-32 dinette table, etc.

    I am looking for a dinette table (less base), a set of interior cushions and a mainsail & jib, all in good condition. Bill Beatty, Upland, CA bilcan1@verizon.net
  59. G

    1986 E-32 Lewmar Hatch Replacement

    Hi All, I'm going to replace my top-side hatches this winter. From reading through other posts, I believe my main cabin old Lewmar Super Hatch is the new Lewmar Ocean 60 Flat. I couldn't find any posts about the smaller forward hatch in the V-berth. I think it is the Lewmar Ocean 20 flat...
  60. K

    Nice 1965 E32 on Ebay

    Just saw this on E-bay. An oldie but a goodie! KJ Here is the link, http://cgi.ebay.com/ebaymotors/32-Ericson-Sailboat-Sail-Boat_W0QQitemZ130168153670QQihZ003QQcategoryZ63731QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
  61. T

    E32 model differences

    Hi all, I'm glad to be a member and Ericson owner! I have an e32 mkIII. I need to find out what is different between the mkIII and MkII models. Specifically, has the rudder been modified, are the sail dimensions the same? I am entered in the 2008 PAC CUP race and don't want to fight the...
  62. F

    E-32 vs. 35 for singlehanding?

    Hi there, I'm still looking for an E-32 late model. I just missed one in Maine by a couple of days. Sometimes I single hand out on our lake here in Knoxville. I currently own a Catalina 25 and it's no problem. One of my fellow club members single hands his Ericson 32 with no problem, and the...
  63. R

    E32 Sails for sale

    I have several E32 sails for sale. The best is a 155% that has been used 3 times. A 125%, two spinnakers and several staysails. You can contacat me at rpkllc@yahoo.com
  64. Tom Metzger

    Wanted - Late model E-32

    Anybody out there getting tired of their 80s or later E-32 in the east? My son asked me to check for him. He would prefer Chesapeake bay and north, but he could be tempted if farther south or west.
  65. T

    E32 Mast Tiedown Rod

    We are in the final stages of purchasing a 1989 E32-200. We've noticed that the mast on this boat has no tiedown rod leading from the mast to the partner. Does this model boat normally have a tiedown? If so, does anyone have a picture of the rod that they can fwd? Does anyone know of a...
  66. W

    Keel Damage E-32

    Just got the boat back from a very long truck ride and I found damage to the keel. I noticed it as a 2 foot long split on the very underside of the aft part of the keel, but once the yard had set it down on the stand, I guess the pressure on the keel split it open, along a significant portion...
  67. J

    1990 E32 Port Lights

    Good Afternoon. I am a new Ericson owner and have a few questions. 1. Aft Port Light replacement: Before I tear into the port lights, is there somewhere they can be bought? I would like to have them in hand so the replacement can be quick. (I searched other threads but didn't find anything...
  68. J

    1990 E32 A/c?

    Good Afternoon, Just bought a 1990 E32. I am interested in where other E32 owners have installed A/C units and what size? (I'm in NC) Any suggestions would be helpful. Thanks, Jack
  69. P

    E-32 For Sale

    We are selling our 1986 E-32. She is in beautiful condition and well equipped. We are located in the Florida panhandle. Email me at: bobpro2@cox.net Or you can go to our web site and get info and photos at: http://www.geocities.com/prote55/Ericson32.html Thanks, Bob
  70. N

    E-32 Spinaker on Craigslist-Maine

    http://maine.craigslist.org/boa/233674444.html This isn't my listing. I just came across it today. (The area code is 207 - we only have one, isn't that quaint?)
  71. K

    Looking for E-32 or larger

    I have a friend that has sold his Hunter 30 and would really like to get a larger boat. He is very impressed with ours but, it is not for sale. Besides, the cost of a E35-3 may be above his budget. Anyone know of any E's in the Northwest that may be for sale in the $30-$45 range? Sure...
  72. D

    Models of E-32

    Can someone describe the models of E-32? This website contains information referring to an E32-1, E32-2, and E32-3, and E32-400 (and maybe some other variants as well), but the descriptions don't appear to be entirely consistent and I can't figure out which version our boat is. Our boat...
  73. S

    E32 For Sale

    Greetings All: I have decided (painfully) to sell Spartina, our 1977 E32. Too many other demands and too little time to enjoy her. She has been completly rebuilt/restored over the past four years, and is ready for a new owner who appreciates classic lines and quality construction. New radar...
  74. S

    E32 Freshwater Leak

    E32 Freshwater Tank/Plumbing The aluminum freshwater tank on my 1978 E32 is located under the Vee-berth with copper pipes run aft under the fiberglass floor then into the bilge where they connect with vinyl hose then lead ultimately to the pump under the sink. A separate fresh water pipe...
  75. S

    E32 Prop Diam/location/clearance

    E32 Prop Diameter & Cutless-Prop Distance I recently repowered my 1978 E32 from an old Yanmar 2QM20 to a new Yanmar 3YM20. The engine purrs but I find my self between a rock and a hard place. The boat has become darn near impossible to reverse to starboard out of my slip and when under...
  76. Salty Dawg

    E-32 Mast Weight????

    Anyone out there know the ~weight for the 32-2 mast?? I'm dropping the mast of our e-32 for the first time and want to transport it home for a complete refit. My local welding shop is building a cradle on an existing trailer and wants to know the ~weight. I live 12 hrs roundtrip from our...
  77. P

    1986 E-32 For Sale

    This boat is in excellent condition. Here is the link to the web site which includes a detailed description as well as several photos: http://www.geocities.com/prote55/Ericson32.html The boat is located in the Florida panhandle near Destin. We keep it on a protected canal behind the house...
  78. S

    E32 Prop Nut to Rudder Distance

    Can anyone tell me the distance from the end of the prop nut to the leading edge of the rudder on an E32 (1978)? If anyone could make a quick measurement, I would appreciate it. I believe that my shaft is to far aft after an engne replacement. Kirby Ericson 32, Alamitos Bay (Long Beach)...
  79. P

    86 E-32 For Sale

    Health forces the sale of our beautiful Ericson 32 (#665). The boat is very well equipped and in excellent condition. Photos and details available upon request. We are in the Florida panhandle. Bob Proteau bobpro2@cox.net
  80. S

    E32 Repower, New Prop

    I have recently re-powered my 1978 E32 from the old Yanmar 2QM20 (20 HP at 2600 rpm and 2.14 gearbox) to a Yanmar 3YM20 (21 HP at 3600 rpm with a 2.21 gearbox). The new engine fits nicely in the compartment but required extensive modification of the rails and a 3” shaft extension. My old...
  81. wurzner

    E32 Pentex Main and 153% on Ebay

    I posted 2 sails on ebay that were from my E32. Both sails are in excellent condition and were approximately $2200 each. For photos and dimensions, you can get the information using the links below. The headsail would be a nice short hoist for the 34 and 35 for a reasonable price if anyone is...
  82. Y

    Cutlass bearing on E32 1970

    Hello, I bought a E 32 1970 and I would like to change the cutlass bearing because there is some vibration. I cleaned the strut and found out that there are no set screws !!! It looks like there is no brass around that bearing (only rubber). Did anyone ever change a cutlass bearing on an...
  83. N

    Repalcement ports for E32

    Folks, Anyone know of an aftermarket supplier of ports/windows that match the originals on the E32? My head sliding port has disintegrated and I’d like to replace it with the same design. Looked around the web and at the Ericsonyacht.com site and haven’t seen any mention of this. Many...
  84. G

    1974 E32 in Mayo, MD for sale

    I was recently in Mayo, MD at GBS boatyard and found a nice E32 for sale. Boat appears to be in pretty good shape and the asking price is $12,000. Also, the same yard has an E25 with a centerboard priced at $6,000. Gary Freeburg SV Katmai E27
  85. wurzner

    1977 E32 in Seattle Area

    Things I have done Peeled the bottom, let it sit for 7 months, and put 4 coats of Interprotect 1000 and 4 coats of West Systsem followed by application of Trinidad SR. July 2004 Intalled a new rudder July 2004 Replaced all gate valves with Seacocks and ball valves (2004) Rebuilt the...
  86. S

    E32 Displacement

    I have a 1978 E32 with, I believe, a manufacturer's rated displacement of 8800 lbs. This displacement seems quite low and I suspect that displacement is something closer to 10,000 lbs. Can anyone provide a realistic estimate of this boat's displacement? The engine is a Yanmar 2QM20H, the...
  87. S

    E32 Repower

    I have a 1978 E32 with a Yanmar 2QM20H sea water cooled engine and would like to repower with either a 20+ HP Yanmar or Beta Marine. At this point, I am leaning toward the Beta Marine. Any experience in swapping out the 2QM20 with a Beta Marine BD722 or BD902 would be greatly appreciated...
  88. wurzner

    E32 for Sail (Seattle Area)

    I posted my boat for sale in the classified section of this site as well as at www.sailboatowners.com I'm looking for 20,000. If you want to see pictures, go to http://photos.yahoo.com. Also, please provide feedback based on the price with respect to what you've have seen or know of...
  89. wurzner

    E32 for Sale (1977) Seattle Area

    I'm considering putting my boat up for sale with the intent of purchasing a larger Ericson. If anyone is considering an E32, here's what mine has to offer. A new bottom (Peeled and dried for 6 months) with 4 coats of Interprotect 1000 followed by 4 coats of West System. Just rebuilt...
  90. N

    Correct Prop for 1986 E32 ?

    Hello, I'm new and in process of buying a beautiful E32. When we haul it next week I want to make sure the correct prop is installed for smoothest operation under power. It has a Universal MX25XP engine. What diameter and pitch should be installed? Any help is appreciated. Thanks - Jerry...
  91. J

    Main Wood Hatch E32 1976

    Well the ends of this have finally given way after almost thirty years of dutiful service. I checked the general discussion and did not see anyone with this exact project so I am starting to ask for the best approach. Repair or Replace? This is a heavey wooden (teak?) cover over the...
  92. Loren Beach

    E-32 Mk3 offshore experiences wanted

    E-32 Mk3 going offshore I get to crew an Ericson 32 Mk 3 down the Washington coast in a couple weeks. Any comments from you owners about: handling, best bunk, your experiences in varying sea conditions? :eek: This is the same hull as the 32/200, as far as I know, and it is seemingly in...
  93. C

    E-32 leaking Rudder Post

    Ok...I've read some of the other threads on this problem. Just hauled the old girl and among other things tried to address the rudder post leak. I repacked the stuffing box,checked the play,which was minimal,dropped the rudder, and greased everything. The thing still leaks. Is it the bronze cap...
  94. S

    E32 for sail/sale on eBay.

    Yes, It's mine. I have bought a bigger boat and need to see this one find a new home. Michael. item 4527590361
  95. wurzner

    E32 Spinnaker Wanted

    I need a spinnaker for my E32. Mine was stolen and I'm going to wait a little prior to purchasing a new one. It was not stolen off the boat, but more than likely being used to spice up some teenagers room. shaun
  96. D

    Mast & bow pulpit needed for E-32

    Hi, I'm looking for a mast for a 1973 E-32. I'm also looking for a bow pulpit. Please email me if you have one. Thanks, Duncan
  97. D

    Mast replacement for '72 E32

    I am the new owner of a 1972 Ericson 32 (not sure if it's a E32-1, or E32-2, etc. would appreciate help understanding the differences) with a broken mast. I am currently looking around for a replacement mast. I have all the mast hardware, including boom, and I'm wondering what my options are...
  98. M

    Prop Strut allignment E32

    Looking for advice on proper alignment of the strut that holds the prop shaft on a 1971 E32. Mine is bent to the starboard side and also appears to be canted "up" too much in the front. The strut appears to be made of bronze and molded into the hull. I'm considering heating it up and putting a...
  99. Salty Dawg

    Need Used Mainsail for 74 E-32

    I'm looking for a Used Mainsail for my E-32.....any suggestions :)
  100. C

    E-32 Rudder stuffing box leak (71')

    Our rudder stuffing box is leaking. Looking at a previous thread the problem is addressed for a 35-2. Is the 32's the same ? Can any 32 owners offer any advice. The stuffing box has the 4 bolts as described in the specs,but ours looks a little different than the drawing. Would like to also...
Top