• Untitled Document

    Join us on March 29rd, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

hard

  1. P

    Hard Pull to Left

    My wife and I took our 30+ out for our first spin yesterday and noticed that it pulled hard to the left while under power. I suspect it's the prop, but nothing unusual was found in the underwater survey. Any thoughts? Also - I presume it best to take the main off the boom and store indoors...
  2. Loren Beach

    Home Built (?) Hard Dodger

    Not a current project, but something I have been sketching on and thinking about for several years. I just did a coastal delivery on a Jason 35 with a nice frp dodger with glass windows. The visibility forward and the general strength was wonderful. Since our our '95 vintage small dodger is...
  3. Bolo

    Hard to find hardware

    I have this hardware on my companion way ladder, like I suppose many Ericson owner do, that I will be replacing when I re-finish the wood part of the ladder. It looks to be badly corroded and may need to be replaced. Problem is where do I get the replacement parts? I don't ever remember...
  4. S

    Flexible or hard motor mounts for 3 mount Uiversal M35

    A previous owner of my 87 Ericson 34 installed a Universal M35 using a 3 mount bracket. This engine replaced a standard 25 hp Universal. The bracket and mounts were the listed part numbers seen in the M35 parts book. A few years back while working on what was suspected to be a transmission...
  5. D

    Hard-to-find E-32-3 1987. Standard Layout

    Selling "Siren" after 22 years of enjoying her. I have taken a second home in Boulder and just not getting her out as much anymore. New Sails, Only 650 hrs on Universal xp-25 diesel. It has some blemishes as you would expect for a boat this age but she is strong and sound and has always been...
  6. The Creamy Pint

    how hard is it to use a lead line?

    Has anybody ever used a lead line? I'm wondering what size weight I need on the end. Is it as simple as putting a knot or mark every fathom and just lowering it until it gets slack?
  7. J

    Hard time hoisting

    My 1985 E32 is equipped with the original Kenyon mast with the standard luff track, the sail is fitted with white plastic guides. The problem is it takes an inordinate amount of effort to raise the mainsail. Once it is up it will not drop independently it requires one to pull it down. I've been...
  8. S

    Hard Pull to Port Under Power - New Repower

    :esad: HELP: HARD PULL TO PORT UNDER POWER>>> After a year of unreliable service and constant problems from my old Yanmar seawater cooled 2QM20, I finally bit the bullet and instructed my mechanic to swap it out for a brand new Yanmar 3YM20. Rather than a return to reliable operation, I have...
  9. T

    E27 Shifting Very Hard

    I have a 1975 with inboard (Atomic 4). I am having a very hard time shifting it into gear. I can get it but it takes a lot of force. I also can not get it to stay in reverse without holding it down. Any ideas whould be great. Thanks Tom Heideman Basackwards
Top