• Untitled Document

    Join us on March 29rd, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

rudder post size?

rhewitt

Member II
To order a new radial drive wheel for our Ericson 34 1988 I need to have the rudder post size...

Can anyone tell me what the post measures?

Thanks,

Ralph
 

cawinter

Member III
Size

Ralph,

I had the same problem after a storm back in 2006. New 8" Edson disk, and I decided to change out cables and chain along with the pedestal rebuild. Very nice and rewarding project. I believe I put a writeup on the list here w/ all the parts and measurements. Please let me know if you need anything.
 

Tom Metzger

Sustaining Partner
Ralph - I'm happy to see that you don't pay attention to the stuff I research for you. :esad:
The attachment on my last post showed the wheel bore: 3.484. Edson might like their drawing #: S-86-1977 from the same attachment.
 

cawinter

Member III
my writeup

BTW, I looked at my old post from a while back. Nothing to add, the info was correct. 2 years back in service and everything is still fine, and the scrapes and scratches from working in the 'aft stateroom' have finally closed up...:)

Ralph, just search on posts by cawinter, and you'll find it.

Cheers!
 
Top