On our E30+ the furling line has a ratchet block on a stanchion just aft of the lifeline gate, also along the port side. From there the furling line rests in a cam cleat just forward of the winch. When rolling it up, I simply release it (upwards) from the cam cleat, haul on the furling line with my right hand while holding the jib sheets with very slight tension in my left hand, standing in front of the steering pedestal. The furling line is well above the fibreglass and causes no damage. This system works well, and my wife also finds it convenient. I don't know if it would work equally well on an E32.
Frank