View RSS Feed

Recent Blogs Posts

  1. Another Engine Panel Upgrade - Pt. 2

    (Continued from Part 1):

    The original black engine panel frame was in pretty good shape. The panel-back has a slight rim around the mounting flange which leaves a shallow void behind the screw holes. I think this is why it often cracks beneath the screws. I filled this void with epoxy around all the screw holes. The black plastic itself is pretty flimsy and the panel was deformed somewhat form having the old gauges clamped against it, but it cleaned up nicely with black spray paint. ...

    Updated 06-05-2019 at 09:33 PM by Kenneth K

    Categories
    Maintenance and Mechanical
  2. Another Engine Panel Upgrade - Pt. 1

    Hereís my posting of my recent Universal engine panel upgrade. The real nuts-and-bolts of engine panel and wiring upgrades has already been posted, thankfully, by C. Williams and T. Metzger (see CW-1, TM-1).

    My write-up assumes youíve already done Modifications A, B, and C posted in the second link. Still, having done those upgrades, a single, undetermined short disabled my entire panel (by repeatedly tripping the 30A supply fuse) during my first start-up this season. The ratís-nest ...

    Updated 06-01-2019 at 12:14 PM by Kenneth K

    Categories
    Maintenance and Mechanical