Recent content by Chris VanHaaren

  1. C

    prop size for Ericson 32-3

    details, details Newgringo: Wow, the devil is in the details. I definitely have a LH prop. For whatever reason a previous owner decided to configure the boat this way because I don't think it came from the factory this way. However, I've learned many important details. First the Hurth...
  2. C

    prop size for Ericson 32-3

    Newgringo: Thanks for the heads up on the transmission. I am unaware that the boat has anything but original. Could the HBW50 transmission run an LH prop? You are correct that transmission and gear ratio is key for the prop sizing so I'll take a closer look at it tomorrow and try to find some...
  3. C

    prop size for Ericson 32-3

    newgringo: Since looking into this, I've talked with a prop guy. Based on boat size, weight, engine, gear ratio, etc he has spec'd a 14x11, 2 blade or a 15x11 if it fits with enough clearance under the skeg (3" clearance is recommended). I'll have to inspect when the boat is pulled for the...
  4. C

    prop size for Ericson 32-3

    prop wash Loren: Thanks for the insight. You are correct, it seems more black magic than science. I'm happy to get some help before making the investment though.
  5. C

    prop size for Ericson 32-3

    props Gulfcoaster, thanks for the reality check. Nice to hear an example that matches my situation. How do you find the folding prop under sail compared to the fixed two blade...does it contribute to better speed under sail? I hesitate at a fixed three blade.
  6. C

    prop size for Ericson 32-3

    Just finished my first summer with an 1985 Ericson 32-3. Great boat. Lots of fun sailing. Different story under power where speed is slow. Getting the proper rpms under load and no load. Cruising 2400 rpm I get 4.5-5.0 kts. Engine is a Universal diesel M25. Prop is a two blade fixed 12LH10. I...
See more
Top