• Untitled Document

    Join us on March 29rd, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

reinforcement

  1. R

    E38 quadrant reinforcement pics

    Hello All, I completed the reinforcement plate to allow the installation of a belowdeck autopilot ram on the steering quadrant of my E38. The reinforcement plate is made of G10 or fiberglass laminate material that is 1/2" thick with additional spacers of the same material but 1" thick. The...
  2. ron7546

    Deckhouse hole reinforcement

    OK- the project is finally coming together.Started last fall gathering material for leading everything aft.BUT-new waterlift system,new AC wiring and etc. trumpted in.The mast plate is in ,the winches are installed with .187" s-s backer plates(which are hidden in the little compartments by the...
  3. J

    Ericson 29 Hull & Deck Reinforcement

    I am considering puchasing a 1977 Ericson 29. I would be using this boat for limited coastal cruising along the southeast. Expect to be at times 40-50 miles offshore with the possibility for heavier weather. I know it is a strong boat, with a heaver displacement, and I am interested in...
  4. J

    Mast Step Reinforcement

    I am in the process (almost done!) of replacing three bulkheads in my 1971 E32. Before I re-install a mahogany arch/support under the mast step, I am wondering if I should do any extra reinforcement in this area. There is some telltale cracking in this area, but I don't know if the thick...
Top