• Untitled Document

    Join us on March 29rd, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

5416

  1. Ensenada Crab

    Your mileage may vary -- i have an e32-2 with a 5416 diesel which is good for. . .

    a newbie by any standard, i am curious how far a 32-2 will go with 15 gallons of fuel and a 5416 universal diesel--w/ two bladed prop. 1,000 rpm seems to move the boat along quite nicely at about 5+ knots). . .so while a few more rpm might increase the speed somewhat, at 1,000 rpms that engine...
  2. S

    Universal diesel 5416 - oil change

    Hi All, I recently bought my 1980 Ericson 30+ with a Universal Diesel 5416 engine and am getting ready for my first oil change. My first oil change on any boat but a boat buddy is going to help me. :-) Although the previous owner seemed meticulous, I want to do a complete job, i.e. change oil...
  3. S

    Low Oil Pressure Universl 5416, Ericson 30+

    I didn't like the idiot light set-up on the Universal 5416 when I became the new owner of a 30+ so I took out the sender and fitted in a proper adapter and oil pressure transmitter. To my shock, after fitting up the transmitter, the oil pressure reads about 1 lb or at most 2 lbs, even at high...
  4. F

    Advice please on replacing fresh water circulating pump: 5416

    Hi, The bearings on the fresh water circulating pump on our Universal 5416 16 hp diesel engine are growling, so I think it's time to replace the pump. I have been told that rebuilding it can be a frustrating and sometimes futile process, so was advised to replace. I have a Kubota Tractor...
  5. WhiteNoise

    Hauling my Universal 5416 this weekend

    Hauling my Universal - pics After having some overheating issues, a little smoke from the exhaust, seemingly low power, and judging the overall visual condition of the motor I have made the decision to pull and completely rebuild my Universal 5416. I will be hauling it out this weekend. My...
Top