• Untitled Document

    Join us on March 29rd, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    March Meeting Info

    (dismiss this notice by hitting 'X', upper right)

e25cb

  1. 20190926_194253.jpg

    20190926_194253.jpg

    Nothing like a sunset cruise. Grand Traverse Bay, Michigan
  2. 20190909_141310.jpg

    20190909_141310.jpg

    Anchored and enjoying a beautiful afternoon relaxing on Grand Traverse Bay, Michigan.
  3. 20190913_150510.jpg

    20190913_150510.jpg

    A nice shot of her lines.
  4. 20190919_122000.jpg

    20190919_122000.jpg

    Sailing by the Dunes on Lake Michigan. Such beautiful water and scenery. Nothing quite like seeing it from the water under sail.
  5. 20190918_102321.jpg

    20190918_102321.jpg

    Sailing by the bell outside Northport.
  6. 20190913_202612.jpg

    20190913_202612.jpg

    The boat always looks so warm and inviting at night. I enjoyed sleeping on her.
  7. 20190909_154318.jpg

    20190909_154318.jpg

    Just enjoying sailing on Gran Traverse Bay!
  8. 20190917_094543.jpg

    20190917_094543.jpg

    Leaving Elk Rapids, Michigan on our long awaited big trip! Next stop Northport, then on to Leland, then Charlevoix, then back to Elk Rapids. A big circle.
  9. 20190905_085037.jpg

    20190905_085037.jpg

    Safely in a Transient slip at Elk Rapids, Michigan after a long trip from North Carolina. Love the reflection! The use of transient slips worked out great for the trip. Clean hot showers, laundry facility, TV, etc.
  10. 20190903_115306.jpg

    20190903_115306.jpg

    They advertised the E25CB as a "Cross Country Cruiser", expanding your cruising range beyond your local area. This was mid journey, 830 miles from North Carolina home port to Elk Rapids Michigan. And yes, in my hurry to go sailing before winter hit I left new bottom paint go...... next year!
  11. 20190913_202523.jpg

    20190913_202523.jpg

    All ready for bed after an energetic day sailing and some good food at a local pub in Elk Rapids, Michigan. I found the little Ericson 25 surprisingly comfortable for her size though clearly she is no thirty plus footer.
  12. 20190920_085909.jpg

    20190920_085909.jpg

    Leaving Gran Traverse Bay, Michigan, and out into open waters off the tip of the Leelanau Penisula on my way to Leland where a friendly transient slip and good food awaits. The little E25 sailed beautifully.
  13. 20190920_122132[2305843009220868885].jpg

    20190920_122132[2305843009220868885].jpg

    Early morning motoring out of Northport Michigan, waiting for wind to kick up, Sept 2019
  14. J

    E25 CB running rigging dimensions

    Am digging into getting my E25 CB on the water - and don't have the original sheets to make measurements. Does anyone have recommendations for diameter and length for main, jib, genoa and spinnaker sheets? thanks
  15. raslocum

    e25 is up for sale

    1972 e25 centerboard model. She's been a great boat but I no longer live close to the lake. I don't have time. 2012 Nissan 9.8 outboard. has trailer assorted sails but they are older. i'm working on getting pics. in the meantime here's a youtube of us all sailing on her...
  16. Ericson 25CB Resurrection

    Ericson 25CB Resurrection

    This is the ongoing story and documentation of the resurrection of a 1973 Ericson 25CB called "Janie Ann". I chose the term "Resurrection" rather than "restoration" deliberately as we view this project as an effort to give a beautiful Ericson a new life with minor changes or upgrades where...
  17. davisr

    using Dow Corning 795 Silicone to caulk glass-gasket joint in portlight

    I'm wanting to hang on to my original aluminum-framed portlights with tempered glass. I plan to rebed the portlights to the exterior of the cabin with butyl tape. This question does not concern that part of the job. Instead it concerns the gasket that holds the glass within the frame. I want to...
  18. davisr

    converting from wire-rope halyard to all-rope

    It's time to replace my wire-rope halyards. I've read various books and postings on the benefits of converting from wire-rope halyards to all-rope. My question, therefore, is not whether or not I should make the conversion, but how best to make it. My existing wire is 7 x 19, 5/32 inch. The...
  19. davisr

    wire luffs in ericson sails

    Vikings, I don't believe that my jib is original to my 1975 E25cb, but I can say that it has been around for a while. It has a wire luff sewn into it. This wire luff is used in an old Schaefer roller furler with a drum at the bottom and a swivel at the top. The original purchase documents that...
  20. davisr

    E25 rub rail and hull-to-deck joint

    There are quite a few threads out there that discuss rub rails and hull-to-deck joints. Many people favor Taco, others Wefco as sources for rub rail replacement. The hull-to-deck joint on the E25 appears to be similar in construction to what is found on other boats in the Ericson line. So...
  21. davisr

    deadrise for thru-hull

    I am in the process of upgrading the electrical system and electronics for my E25. I'm thinking about purchasing the new Garmin GPSMap 541s while the $100 rebate is in place. I'm looking a several different thru-hull transducer options. The existing thru-hull is about three feet forward of the...
  22. davisr

    getting more space from the lazarette

    The access to the lazarette in the E25 is not in the cockpit sole, but through a small door behind the companionway. This, of course, is where the engine would be - if my boat had an engine instead of an outboard - so some might refer to this space as the engine compartment. At any rate, it...
  23. Joe

    E25cb Backstay Chainplate Access

    I'm now stripping the boat of all deck hardware for rebedding and repaint. I've been struggling all morning to remove the backstay chainplates (as well as the rear lifeline and navigation light) through the lazarettes. I really don't want to go through this struggle when I reattach them, so I'm...
  24. Joe

    E25cb Cockpit Sole Hatch

    I have an E25CB without an inboard. The space under the cockpit sole currently only houses the water tank and battery box. Access is via a small door under the cabin steps. I'm considering ripping out the water tank/battery box and installing an access hatch or two in the cockpit sole. I'll...
  25. davisr

    e25 centerboard trailering weight

    Dear E25 cb Owners, I am in the process of buying and e25 centerboard version. At the same time I am also in the market for a good galvanized trailer that I can use to trailer launch the boat in salt water. Since there are no good used sailboat trailers of this kind that I can find on the...
  26. Rob Hessenius

    Wanted; Pictures of E-25CB Trailers

    To all- I recently purchased a trailer for my 25. I am going to have to do some slight modifactions to seat the boat properly. What I would like is some pictures of existing trailers that rest E-25CB's. The views that I prefer are empty trailer shots of the bunks/rollers from the front and...
Top