• Untitled Document

    Join us on April 26th, 7pm EST

    for the CBEC Virtual Meeting

    All EYO members and followers are welcome to join the fun and get to know the guest speaker!

    See the link below for login credentials and join us!

    April Meeting Info

    (dismiss this notice by hitting 'X', upper right)

regulator

  1. Balmar SmartLink Network and App

    E32-200 Balmar SmartLink Network and App

    A careful user of a sailboat (or any boat, really) should want to periodically know the answer to the questions: How well-charged are my batteries? Is my alternator operating normally? A careful installer of a system monitoring the batteries and power supply of the same sailboat will ask...
  2. windblown

    Ok to shorten BALMAR regulator sensor wires?

    I have an older BALMAR 612-dual regulator. The temperature sensor wires are 120“ each, and I only need about 1/3 of that length. Is there any reason that I shouldn’t shorten them? I would do it at the regulator end, replacing the insulated female connectors. I tried to check with BALMAR this...
  3. C

    Sterling regulator

    I read this recent article by Niger Calder about Sterling regulators. One of the big mags. Who would have thought? Essence: don't go fancy on alternators or batteries, use to the MAX what you have. As usual great writing. I did a bit of searching in the archives, but nothing popped out...
  4. T

    Balmar Regulator Trouble?

    Before I call Balmar in the morning, I wanted to run this by the experts on the board. I’m installing the Leece-Neville 89 amp alternator and a Balmar ARS-5 regulator. At the same time, I am separating the house and start circuits and installed a Blue Seas ACR. I go to turn the...
  5. R

    Smoking voltage regulator!

    Here we go again.... The boat is on the hard and plugged into AC power, AC panel is on and the Xantrex/Statpower Truecharge 20 is on charging the batteries. No different than I have done many times before.... Working on wiring in new instruments I noticed that the battery combiner solenoid was...
  6. Shadowfax

    Installation of a Balmar Aternator & Xantrex Regulator

    I'm posting this to the list in the hope that it may be of service to someone thinking of this upgrade. I originally wrote this to Tom Metzger, resident electrical engineer and my personal electrical guru, who helped me thought the decision process and the mechanics of the installation...
Top