FS: 1978 E31 Independence Cutter: PRICE $27K OBO
We have decided to lay the groundwork for our long term liveaboard and cruising plans by buying a larger boat. This means that we will have to part with (reluctantly) our Independence 31. We are still trying to determing our asking price but are open to reasonable offers.
She is located near the Little Creek Amphibious base in Norfolk, VA. We will be hauled out the first week of July to complete some of the items listed below. After that I will be moving on to other, more cosmetic issues.
Please email or PM for pictures or more details.
Thanks for your interest.
Hull/Deck/Mechanical
- 18 hp Volvo 2002 diesel 2473 hrs
- 35 gal diesel
- new (Jul '07) cutless bearing
- new (Jul '07) seackocks for cockpit drains, engine intake, galley sink
- new (Jul '07) Drivesaver shaft coupling
- painted bottom (Jul '07)
- repacked stuffing box (Jul '07)
- rebedded staysail traveller (Jul '07)
- new (Apr '07) watertight hatch in cockpit floor for engine access
- dodger
- 2 CNG tanks with regulator
Plumbing
- 45 gal fresh water
- new ('05) 18 gal SeaLand holding tank with deck pumpout and macerator discharge
- new ('05) macerator pump
- new ('05) whale foot pump for galley sink
- new ('05) bronze ball valves, siphon breaks and hoses for head plumbing
- Fynspray hand pump for head sink
Interior
- v-berth forward
- head to starboard
- hanging locker to port
- fold up dining table
- settee to starboard (pulls out to double berth)
- settee to port (single berth)
- U-shaped galley to port with dry storage, 2-burner CNG range (oven inop), icebox, lockers outboard, dry storage in island
- nav station to starboard
Sails/Rigging
- newer lightly used yankee cut jib with on ProFurl roller furling
- older self-tacking, hank-on staysail (1 set reef points) on removeable inner forestay with ready bag
- older mainsail (2 sets reef points) with cover
- new ('06) assymetric cruising spinnaker with ChuteScoop
- all new ('05) running rigging (except spin halyard, outhaul, topping lift)
- new ('05) bobstay and whisker stays
- new ('05) Garhauer mainsheet traveller and 6:1 sheet blocks
- new ('05) teak bowsprit & anchor platform
Anchor/Docking
- new ('05) 33 lb. plow anchor with 35' chain & 250' 3-strand nylon
- bronze manual windlass
- 4 fenders
- docklines
Electronics/Electrical
- Garmin GPSMap 168 sounder/chartplotter with integrated depth/temp/speed transducer
- Uniden 525 VHS with DSC (networked with GPS)
- Danforth-White removeable pedestal mounted compass
- masthead antenna
- 2 75AH deep cycle house batteries ('05)
- starting battery ('05)
Safety
- 4 Type 2 PFDs
- 2 Mariner 110 fire extinguishers (new May '07)
- flare kit (exp 09/07)
included not installed
- 6 gal. Seaward engine/110V water heater (used)
- 12V water pressure pump, accumulator, galley faucet, head sink/shower faucet (used)
- Navico wheel pilot (used - needs service)
- rebuilt Whale Gusher 10 manual bilge pump with new deck lid
- stainless bow pulpit
We have decided to lay the groundwork for our long term liveaboard and cruising plans by buying a larger boat. This means that we will have to part with (reluctantly) our Independence 31. We are still trying to determing our asking price but are open to reasonable offers.
She is located near the Little Creek Amphibious base in Norfolk, VA. We will be hauled out the first week of July to complete some of the items listed below. After that I will be moving on to other, more cosmetic issues.
Please email or PM for pictures or more details.
Thanks for your interest.
Hull/Deck/Mechanical
- 18 hp Volvo 2002 diesel 2473 hrs
- 35 gal diesel
- new (Jul '07) cutless bearing
- new (Jul '07) seackocks for cockpit drains, engine intake, galley sink
- new (Jul '07) Drivesaver shaft coupling
- painted bottom (Jul '07)
- repacked stuffing box (Jul '07)
- rebedded staysail traveller (Jul '07)
- new (Apr '07) watertight hatch in cockpit floor for engine access
- dodger
- 2 CNG tanks with regulator
Plumbing
- 45 gal fresh water
- new ('05) 18 gal SeaLand holding tank with deck pumpout and macerator discharge
- new ('05) macerator pump
- new ('05) whale foot pump for galley sink
- new ('05) bronze ball valves, siphon breaks and hoses for head plumbing
- Fynspray hand pump for head sink
Interior
- v-berth forward
- head to starboard
- hanging locker to port
- fold up dining table
- settee to starboard (pulls out to double berth)
- settee to port (single berth)
- U-shaped galley to port with dry storage, 2-burner CNG range (oven inop), icebox, lockers outboard, dry storage in island
- nav station to starboard
Sails/Rigging
- newer lightly used yankee cut jib with on ProFurl roller furling
- older self-tacking, hank-on staysail (1 set reef points) on removeable inner forestay with ready bag
- older mainsail (2 sets reef points) with cover
- new ('06) assymetric cruising spinnaker with ChuteScoop
- all new ('05) running rigging (except spin halyard, outhaul, topping lift)
- new ('05) bobstay and whisker stays
- new ('05) Garhauer mainsheet traveller and 6:1 sheet blocks
- new ('05) teak bowsprit & anchor platform
Anchor/Docking
- new ('05) 33 lb. plow anchor with 35' chain & 250' 3-strand nylon
- bronze manual windlass
- 4 fenders
- docklines
Electronics/Electrical
- Garmin GPSMap 168 sounder/chartplotter with integrated depth/temp/speed transducer
- Uniden 525 VHS with DSC (networked with GPS)
- Danforth-White removeable pedestal mounted compass
- masthead antenna
- 2 75AH deep cycle house batteries ('05)
- starting battery ('05)
Safety
- 4 Type 2 PFDs
- 2 Mariner 110 fire extinguishers (new May '07)
- flare kit (exp 09/07)
included not installed
- 6 gal. Seaward engine/110V water heater (used)
- 12V water pressure pump, accumulator, galley faucet, head sink/shower faucet (used)
- Navico wheel pilot (used - needs service)
- rebuilt Whale Gusher 10 manual bilge pump with new deck lid
- stainless bow pulpit
Attachments
Last edited: