Results 1 to 7 of 7

Thread: Problem unfurling headsail

  1. #1
    Contributing Member I
    Join Date
    Oct 2018
    Location
    Navarre Beach, Fl
    Posts
    15

    Angry Problem unfurling headsail

    I have a 1987 Ericson 26-2, recently purchased and am unable to completely unfurl the jib. It will unfurl about half way, and bind up. The furling line isnít stuck, but I see no reason for it to lock up
    able to furl it back in
    Any suggestions?

  2. #2
    Contributing Member III
    Join Date
    Sep 2013
    Location
    Nova Scotia, Canada
    Posts
    63

    check the obvious

    Is there too much line wrapped around the furling drum?

    Peter
    Last edited by Jenkins; 05-18-2019 at 04:17 PM.
    E29 1976 Atomic 4

  3. #3
    Curator of Broken Parts toddster's Avatar
    Join Date
    Jul 2011
    Location
    Oregon - The Gorge
    Posts
    1,609
    Blog Entries
    49
    Also obvious: Halyard wrapping around the top end?
    s/v arcturus E29 #134

  4. #4
    Contributing Member I
    Join Date
    Oct 2018
    Location
    Navarre Beach, Fl
    Posts
    15
    That appears to be the problem
    Thanks for the advice

  5. #5
    Principal Partner Afrakes's Avatar
    Join Date
    May 2009
    Location
    Port Kent , NY 0n Lake Champlain
    Posts
    616

    Fix

    In calm wind conditions unwrap the sail and halyard. Then raise the sail higher on the foil to eliminate as much exposed halyard as possible and install a pendant to connect the bottom of the sail to the furler drum. The next time the mast is down install a halyard restrainer. This assumes you have an all rope halyard. If it's wire and severely twisted then there may be a bigger problem in getting the sail down. Once down get rid of the wire and change to all rope.
    Last edited by Afrakes; 05-19-2019 at 03:01 AM.
    Al Frakes
    1987 E-28 Reba Gee
    Hull #663
    Port Kent, NY

  6. #6
    Principal Partner
    Join Date
    Sep 2013
    Location
    Port Angeles, WA
    Posts
    767
    Another possibility is bearing failure on the upper swivel. On my boat, the sail would furl one way but not the other. Cleaning and lubing it (generally not recommended) would work for a while then it would fail again. Replacing the swivel solved the problem. The Mark 11 fuller had no parts available but I found a new one on the net. Perservance paid off in the search.
    Last edited by supersailor; 05-19-2019 at 08:00 AM.
    Bob Morrison
    1987 E-34 Hull #15
    "Terra Nova"

  7. #7
    Contributing Partner
    Join Date
    Mar 2016
    Location
    Chicago
    Posts
    182
    Just had a similar problem in that the furler would not unroll the last couple of turns. Inspection revealed that the sail pre-feeder had made its way into the space between the luff and the foil just above the tack shackle and was stopping the drum from turning.
    1987 34-2
    Tortuga
    Universal M25XP

Similar Threads

  1. E39 Headsail
    By gadangit in forum For Sale & Wanted
    Replies: 26
    Last Post: 04-05-2012, 11:33 PM
  2. Headsail Furling
    By sbuck in forum Maintenance & Mechanical
    Replies: 7
    Last Post: 12-22-2006, 10:28 AM
  3. 25+ headsail
    By Mark F in forum Design & Function
    Replies: 1
    Last Post: 08-26-2006, 08:16 PM
  4. Need headsail for E-29
    By Ray Hughes in forum For Sale & Wanted
    Replies: 2
    Last Post: 05-09-2004, 09:45 PM
  5. E34 Headsail - SF Bay
    By ccorcoran in forum Cruising & Racing
    Replies: 1
    Last Post: 10-08-2003, 09:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •