Doug177
Member III
Just wanted to know what profiles Bruce used most often on Keels and Rudders?
From a quick measurement it looks like the profile on my E35-3 rudder about 6 inches down from the top is:
Chord = 24 inches Maximum thickness about 4.125 inches about 1/3 of the way back (8") from leading edge which works out to an NACA0017 Section. This seems just a tad fat.
Doug
From a quick measurement it looks like the profile on my E35-3 rudder about 6 inches down from the top is:
Chord = 24 inches Maximum thickness about 4.125 inches about 1/3 of the way back (8") from leading edge which works out to an NACA0017 Section. This seems just a tad fat.
Doug