Results 1 to 2 of 2

Thread: Mast Compression - Ericson 23 MK1

  1. #1
    New Member
    Join Date
    Jul 2018
    Location
    Dana Point
    Posts
    1

    Mast Compression - Ericson 23 MK1

    I recently just got an ericson 23 1 and the mast has some compression pushing down. I was wondering if anyone has any idea how to unhook this mast, as well as, what type of deck plate to use and how to reinforce the fiberglass? It seems early, and there is no rot in the wood, so i was thinking placing a 12x12 plate over the compression and fiberglassing it? Any ideas?

  2. #2
    Innocent Bystander tenders's Avatar
    Join Date
    Jun 2006
    Location
    Harlem Yacht Club, City Island, NY
    Posts
    1,045
    The mast will almost certainly just lift off the shoe once you lift it with the crane (and remove the shrouds, of course).

    "No rot in the wood..." How do you know that? That area isn't designed to compress; something is amiss, and it isn't going to get better over time or when the boat is being sailed.

    I'm not suggesting this specifically, but a wide (18"?) piece of 1/2" G10 placed across the mast step might solve the problem for a while if everything is OK down below looking up at the compression post. You'd need to make sure that the turnbuckles have enough thread to accommodate a slightly taller mast.

    With the sage advice from many on this board, here's what I did with a related problem that was only noticeable from below, not above:
    http://www.ericsonyachts.org/infoexc...st-step-repair
    1969 Ericson 32 #112 • Atomic Four
    City Island, NYC
    “Muxie Duxer”
    Hair by Mr. Gigi

Similar Threads

  1. cabin top compression on Ericson 33 RH
    By Camelot in forum Cruising & Racing
    Replies: 11
    Last Post: 06-29-2018, 12:28 PM
  2. Have to repair my mast step/compression post--what tools do I need?
    By knoisewater in forum Maintenance & Mechanical
    Replies: 3
    Last Post: 05-24-2016, 03:36 PM
  3. Are "compression tubes" really necessary for mast throughbolts?
    By tenders in forum Maintenance & Mechanical
    Replies: 9
    Last Post: 11-18-2014, 06:58 PM
  4. Replies: 4
    Last Post: 03-14-2014, 11:31 PM
  5. Ericson 27 Compression Post Question
    By TheFletchers in forum Maintenance & Mechanical
    Replies: 2
    Last Post: 05-16-2011, 06:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •