dcapn@hotmail.c
Member I
Aloha,
I'm seeking a clean shower curtain for a 1986 E-38-200, (or ideas on how to create one).
I'm seeking a clean shower curtain for a 1986 E-38-200, (or ideas on how to create one).
Seeking clean shower curtain for E-38-200
- Thread starter dcapn@hotmail.c
- Start date
Buy one and cut it to size with scissors?
Then sew onto it the existing slides?
Then sew onto it the existing slides?
Took a different track
After years of bleaching and scrubbing and replacing slides...I picked up some 1/4 inch stainless tube and 1 1/2 inch stainless strap eye. I drilled a 1/4 inch hole 1/4 inch deep in the wood above the shower liner on the center line side of the shower stall. On the opposite side I used the strap eye to fasten the tube to the highest point that would still allow a shower curtain to slide back and forth. There is a piece of trim in this area that stops the tube from moving horizontally. This allowed use of a standard shower curtain and is actually mounted higher then the original aluminum track. $10 fix. I will be at the boat this afternoon and I'll try to take a pic.
Strap eye:
After years of bleaching and scrubbing and replacing slides...I picked up some 1/4 inch stainless tube and 1 1/2 inch stainless strap eye. I drilled a 1/4 inch hole 1/4 inch deep in the wood above the shower liner on the center line side of the shower stall. On the opposite side I used the strap eye to fasten the tube to the highest point that would still allow a shower curtain to slide back and forth. There is a piece of trim in this area that stops the tube from moving horizontally. This allowed use of a standard shower curtain and is actually mounted higher then the original aluminum track. $10 fix. I will be at the boat this afternoon and I'll try to take a pic.
Strap eye:
Attachments
-
strap.gif
