I have a laminate cabin sole that looks like the above picture. I had a leak in my head over the years and about a one foot section is not attached to the boat floor any more. The problem is is that the section that is not attached is in the middle of a long piece which is attached at both ends. To fix it I was thinking I could either rip up one side an then glue down (How does one rip out a section without damaging it), cut the material in a straight line and glue or lastly try and find a way to inject some glue under the loose material and then place a weight on top until it dried. Before I begin this project I thought I would ask for opinions.
Thanks