This time I used thickened epoxy on all the edges and let the first course cure before adding the reinforcing layers of biax. This turned out way better with much fewer voids.
Try #2
I filled the voids and spent hours sanding it flush. Then I primed it, but the primer cured lumpy, so I spent more hours sanding it smooth...
-
20852.jpg
70.8 KB · Views: 1,341
-
20848.jpg
113.5 KB · Views: 390
-
20849.jpg
116 KB · Views: 391
-
20850.jpg
64.1 KB · Views: 365
-
20851.jpg
204.5 KB · Views: 413