Following on from Part 1 of this blog the next day after the epoxy had cured I preceded to pre-cut out 2 layers of 6 oz fiberglass cloth, a sheet of 3.5mm plastic sheeting (used for covering floors during construction etc.) sourced from Home Depot, and pre-cut a sheet of cardboard. The next task involved wetting the top layer of the balsa core and then applying a layer of cloth and working this into the epoxy and followed by another layer of cloth and working the cloth into the gap around...
-
20346.jpg
123.1 KB · Views: 894
-
20344.jpg
90.5 KB · Views: 257
-
20345.jpg
106.5 KB · Views: 236
-
20358.jpg
45 KB · Views: 227