With the interior gutted and in a pile on the floor and the bilge finally cleaned of it's grease and oil, It was time to start the bulkhead rebuild.
We started at the bow and using the story stick method traced the shape of the hull onto a story board which then was transferred onto 18mm marine plywood. the bulkheads were through tabbed to the hull then further fillet tabbed. I added some weatherstripping foam to edges to lift the bulkheads off the hull an 1/8th of an inch to prevent...
-
18954.jpg
62.4 KB · Views: 151
-
18955.jpg
62.2 KB · Views: 152
-
18956.jpg
67.7 KB · Views: 150
-
18957.jpg
50.7 KB · Views: 151
-
18958.jpg
41.2 KB · Views: 616