[FONT=&]I've now setup my boat for the anchor chain to feed off the windlass and loop back forward and enter a hawsepipe (1 1/2") PVC pipe installed in the anchor pan and all the chain to drop...
kiwisailor 04-09-2018 12:00 PMSometimes you have to work with what you are given to start with. In my case my boat came with a Lofran Royal manual windlass with a 3/8" gypsy already installed on the deck just aft of the anchor...
kiwisailor 04-09-2018 08:50 AMKennethK and I had an email conversation a month or so back about good places to stow things on a 32-III. There are only so many "spots" for things, and one of my laments was that there was no...
bgary 03-19-2018 10:31 AMIn one of my previous blogs I had a request to write up about my solar PV setup. This site has been a godsend of information about my Ericson 38 and various projects that I've had to tackle so...
kiwisailor 03-12-2018 04:45 AMLate last season I had the pleasure of a sailing guest aboard the boat leave the head pump valve lever in the wet flush position and not in the dry bowl closed position - after having received...
kiwisailor 03-11-2018 12:56 PM---
---
Welcome home to your website on the entire Ericson Yacht line! We hope you'll enjoy your visit, and find it useful. This site was created by Ericson Yacht owners, for past, present and prospective Ericson Yacht owners. It contains links to other Ericson sites, as well as an extensive discussion board, relevant and useful documentation, and many outlined projects common to Ericson and other production sailboats.
If you have comments or questions, we hope that you'll contact us. Thanks for visiting us at www.EricsonYachts.org!
![]() |
![]() |
![]() |
![]() |
I like those handles. Mine is the "one finger" kind that's sometimes hard to handle, so having an actual handle would help a lot.
I have one I've been trying to sell. PM me if you're interested. it's an indigo
Jay
Hi All!
Looking for a new prop for my atomic 4 powered 1978 E27. New or used is fine for me
I am located in Marina Del
Could be. I did both batches exactly the same
-- cold-weather formula (says "4 hour pot life, full cure in 2 days" at 50F)
-- temps
For my thru hull replacement, I used Kitty Hair long strand Polyester filler between the backing block and the hull. I needed to have the backing block
markvone Today, 08:11 AMI believe that. Where I am at on the Chesapeake bay we transition from light brackish to salt over the course of the summer, so I want the best for brackish
GrandpaSteve Today, 07:56 AMThere are several online zinc suppliers and you can find out more than you ever wanted to know about anodes. BoatZincs.com has more types of zincs than
supersailor Today, 07:55 AMThe oil has to be warm, just short of hot. Probably means running the engine half a hour.
Bring some household empty jugs so you can distribute
My anchor locker expansion.
Like most people here, I’ve had to deal with the anchor pan leaking into my v-berth. Two winters ago, I removed the pan and scraped what I thought was all of the old silicone caulk from the joint and...
woolamaloo 04-15-2018 01:57 PM