Autohelm AH800 Belts

[RKCRWLR]

My trusty old AH800 is popping. Looks like the drive belt (cogged) is stretched too much after many years of use. As I mostly singlehand, I use it a lot. Anyone know a source for parts? Otherwise I'll have to look to a new one.

Thanks! Tim

[mherrcat]

It's probably just some type of timing belt. I would see if there is a model number on it somewhere or try to match it up by measurements to something on the web. Here's one place I looked at:

http://www.econobelt.com/Timing_Belts.htm

McMaster-Carr might have something as well.

[Emerald]

I think you have an earlier drive style, but on the chance you're the same as an ST4000, my belt matches up to an AT5-750.

[Ed Valente]

I found myself in the same situation 3 weeks ago with my 20 yo Simrad Wheel Pilot. I was able to find the discontinued belt through POLYBELTS.com . If you don't see it on line, try calling. Mine was not listed but they had it in stock. Good luck.

Ed