PDA

View Full Version : For Sale Yanmar 2GMF20 & E-30 Parts



Ericsean
08-09-2010, 11:56 AM
I have a used Yanmar 2GM20, Fresh water cooled engine. Bought it to install in my 1970 E-30, but bought an E-38 instead. Now parting out the E-30, so the engine is for sale. along with 4 Yanmar motor mounts and Yanmar Panel.
$2,500 for all. I will throw in 3/4" steel plates I had fabricated that will mount to old A-4 motor mount spacing, and accept the new Yanmar Motor mounts. Located in Babylon, NY. Would prefer pick-up.

Also have 18gal plastic Tempo Fuel Tank, which has been cleaned and will accept diesel fuel. $75.

Martec Folding prop, 12 x 6 (too small for Yanmar) $100

Edson Pedestal Steering complete w/ all sheaves and quadrant and wheel, $500.

Mast and Rigging $300.

Lifeline Stanchions, complete w/ wire 200 (relatively new top wire) or 25/each

Windows 25 each for large, 10 each for small (all fixed)

Raymarine 40 series depth/speed combo w/ transducer - $100

Barlow 16 two speed winches, pair $150

Barlow #10 single speed winches pair $75

3/4 oz tri-radial spin, red/white panels on bottom, solid blue w/white stars on top $400. (One panel repaired and slightly different blue color) some color bleeding.

Doyle Stac-pack main w/ 3/4lehtght tapered battens $200.

North Mylar 150, triradial $100 (has a few light air races left in it)

Shore asym off a Mariner 28, radial head, red white & blue, very crisp, limited use, $400.

Frank Langer
08-09-2010, 02:00 PM
Hi Kevin,

I am interested in the Raymarine 40 series speed/depth/transducer. Can you confirm that it still works properly? Can you ship it to British Columbia, Canada?
Please email me at: franklanger@live.ca.

Thx.
Frank

exoduse35
08-22-2010, 08:07 PM
i am interested in the #10s, Edd exoduse35@yahoo.com

boethius27
08-22-2010, 09:43 PM
Hi, can you shoot me an email about the Doyle Stac pac? Thanks.

justin@jigsawindexing.com
:egrin:

Lucky Dog
08-22-2010, 10:38 PM
I would be interested in the Barlow 16 two speed winches, pair $150

and the Martec Folding prop, 12 x 6 (too small for Yanmar) $100


ml

VolvoEricson
08-22-2010, 11:01 PM
I would be interested in 2 of the small fixed windows. Rob Hessenius
rhessenius@hotmail.com

Lucky Dog
08-23-2010, 10:04 PM
Where in Wisconsin are you?

ml

Lucky Dog
08-23-2010, 10:07 PM
Kevin,

Is the prop still available?

scuppers@dishmail.net

ml

exoduse35
08-23-2010, 10:12 PM
I am also interested in one of the small windows, Edd

ref_123
08-24-2010, 02:22 AM
Hi Kevin,

what are the dimensions on the assymmetrical spinnaker and is it still available?

Thanks,
Stan

DavidWms
04-08-2011, 04:17 PM
Hi. Do you still have some of the parts available?

Ericsean
04-11-2011, 02:56 PM
I could never bring myself to cut up the boat.

I guess if someone had bought the Yanmar, it would have made it easier for me to part out the boat.

Thinking of installing the engine, and putting in the water to enable me to sell the whole package.