scupper

I sailed out the Golden Gate in a friend's Tayana 37, and steep 10' waves right out the gate were a definite wake-up call for me. My E29 (tiller model) has only one small drain in the cockpit; not nearly enough. I'm considering cutting one or two fairly large drains through the transom...

Hello does anyone have information on where I can get a new/used scupper drain? I have a 1977 E-27 and need port side scupper drain. Please respopnd to dkopp@block.com Thank you.

Finally found the source of the water that continually collects in the bilge of my 87 E26. It is the plastic fittings that go thru the transom. Does anyone know the hole size and the hose size? Should I go with bronze?

Maybe cross-strapped is the wrong term ? What I mean is port drains to starboard and vice versa. The current scuppers on Senta II are probably 1" or maybe 1.5" and there are only two. There are a few other things "wrong with this picture" but first I want to address the drainage question...

On a E-35 Mk III does anyone have an idea why two of the scupper drain hoses go to a "T" and then go to a below the water line through hull to drain? Doesn't seem to make sense that they would drain below the water line. This is in the context of winter storage in the water. Thanks, John...

I've got one of the E27s with the cutaway transom. After reading through all the threads concerning cockpit scuppers, connecting hoses, and seacocks, I was almost disappointed to find that my boat has only one cockpit scupper. But it's probably not a problem because any big water in the...

Im a noobie to sailing and have recently aquired an Ericson 23 as my first boat. After a heavy rain I went to take the boat out only to be greeted with a cockpit full of water. The water also overflowed into the cabin! I was able to thread a piece of cable through the scupper grate so I am...

After a full weekend of swearing and bloodying my knuckles I finally have the rusted exhaust riser and cockpit scupper hoses removed from the boat. The original scupper hoses needed replacement since they are cracked and very bad shape. The issue is whether the original design, leading...