rails

Anyone have any tips for keeping the steel engine mount rails under the Atomic 4 from rusting? The marina I'm currently at is replacing one of the engine mounting rails, and the other is in fair condition. I'm curious if painting them, or using Naval Jelly will help them last longer than the...

Anyone recommend a source for replacement teak handrails on a '73 E27?

Does anyone know where there might be a used, but not bent, bow rail and a port side stern rail. I can clean them up but not being bent is the main concern. Thanks, Contact me direct at wthoffman@gmail.com or 941 322-4551 1986 38-200

I need to replace the 9 loop deck rails on my E-27. they where terrible shape when i bought the boat 2002. I refinished them and rebedded, but they have served the old girl well. I have checked the web found a few sources, but I wonder if any owners have found the exact replacement ones? Let...

any tips on replacing old, cracked rub rails on a early 70's e23? thanx !!!:)

This may not help but I thought I would mention that I have a surplus of about one 26 1/2 foot length of the rubber insert from my E-27. I also have about a 6 foot length of the rubber insert. The reason was that when I bought it from PSC it only came in 40 foot lengths. I also have about a 6...

Hi, I`m looking for hand rails from an E27 to install in the cabin. Thanks Ron

Purchased an E27 with the exterior grab rails removed.The cabin trunk had been drilled all the way thru but then filled.(project abandoned) I'm assuming when she was built that the rails were screwed to the cabin top and when the screw holes enlarged and the rails loosened the owner removed them...

I recently replaced the wood hand rails with stainless steel ones on my E-38. If anyone wants the old wooden ones, you can have them for $0 but they're in Auburndale, Florida (central Florida off I-4) and 13' 2" long & curved so shipping might be an issue. Better to pick them up. They're...

Has anyone with a mid eighties boat replaced the teak hand rails with stainless rails? I have removed the rails on my 1987 E-34 so I can refinish them, and have been wondering if I should replace them with stainless elliptical tubing to save having to do this again in the future. It is very...

Anyone make these? Have any good ideas or regrets? I have mine off right now to refinish over the winter and I would like to keep them in good shape for as long as possible. Also would love ideas for exterior hatch covers in sunbrella too. Thanks

I looked at the description of "raftup" and it mentioned mindless chatter. This is probably where it fits. The grabrails on my 71/E29 were pretty thin and needed to be replaced. They were so thin the teak plugs were beginning to wear on the sides when I last re-finished them. I mentioned to my...

Hi, I would like to fine some curtain rail like the one in my boat now, see picture below. Does anyone know where I can get my hands on some? Thanks