loop

I have a siphoning question about the bilge pump vented loops. I recently installed a second automatic bilge pump slightly higher than the original in my 1970 E32. I put the outlet near the top of the transom on the port side because there was already a hole there. I have a vented loop...

After many nights trying to decide where my next cruise is gonna take place..I have decided " Amigo" and I are doin the Great American Loop. I have friends all along the way and keep putting off visiting them due to me never wanting to leave the boat...I LOVE my boat! So...instead of driving the...

Hi Everyone, I'm doing the same project as Sean on my E35/3, namely re doing the whole sanitation system with new holding tank and lines. Question - how high should the anti-syphon loop be placed? Sean's was put high up under the sink on the plywood pad which looks as though it was designed...

My 1976 E27 has an Atomic 4 with an upward loop (galvanized) in the exhaust line at the thruhull in the stern. Any Ericson owners out there have the same setup? I spoke with Don Moyer and he didn't recall any boats using the A4 with this. The reason for asking is I have some restriction...

I need to replace the 9 loop deck rails on my E-27. they where terrible shape when i bought the boat 2002. I refinished them and rebedded, but they have served the old girl well. I have checked the web found a few sources, but I wonder if any owners have found the exact replacement ones? Let...

I have an E27 with a Palmer P60. This is a raw water cooled engine with a water lift muffler. The exhaust hose currently rises from the muffler to the top of the lazarette then loops back down to the thru-hull outlet. Should I place a vented-loop in the exhaust line? Thanks in advance. Steve...