elbow

I'm looking for a replacement exhaust elbow, part #170-2834 that I believe was made by Onan, for my 1988 E32-200 with the Universal M25XP engine. See the attached pictures. Any idea on sources for this part? Also, when I took the system apart I found the water injection port to be nearly...

Hi everyone, Our insurance company has asked us to replace the pvc elbow on the pump-overboard thru-hull on our boat. I know some of you have already done this. To save time and money, I was wondering if anyone had simply "unscrewed" the pvc elbow from the thruhull, and replaced it with...

I have an E-32 III with a Universal M-25XP engine. The original exhaust elbow riser started showing rust spots on either side of the elbow indicating that it was failing. The metal was rusting out at both spots so I figured it was time to replace the unit. I contacted Torrensen Marine, via...

Looking at the exhaust on my 5432 last weekend it occurred to me that it could be improved. The exhaust exits the riser to a hose that is tapered and clamps to a 90* bronze plumbing fitting then to the waterlift muffler. The 90* fitting is a standard marine plumbing fitting with screw in hose...

Hi: I have a 1988 E 38-200. The engine runs at a steady 160 degrees (though I do have some steam). I noticed after a 1.5 hour run yesterday at 2100 rpm that the area in the aft cabin that nearly abuts the exhaust elbow was hot to touch. Is this normal? Is is possible to have a normal...