Recent content by orangedog

I'm looking for a wiring diagram for a Weems & Plath blower timer, I have the panel in the boat (E29), it looks like original equipment, but at some point a PO put in a new blower and bypassed the timer panel. See link for image of panel (I'm not sell it, I just found the image on ebay). Any...

I purchased an E29 this summer with partial spinnaker rigging and want to determine what additional hardware I'll need. I have the spinnaker pole, the mast has a spinnaker ring on the front, there is one 2.5" block mounted on the lower starboard side of the pulpit and 1 car on the starboard...

No topping lift currently, I might add one this winter when the mast is off. Have the spinnaker and am looking forward to trying it next summer. thanks dave

Not too worried about racing, just deciding whether to keep or sell the pole, thanks

I get the same problem if the bilge pump is lying on its side, if you have a deep bilge like the e29 it can be hard to situate the pump properly. I would suggest trouble shooting it in a pail where you can see whats going on.

I recently purchased an E29 with a spinnaker pole of about 13'. The PO thought that the pole may have come from a different boat and was likely too long. Any thoughts on what the length of a pole should be on an E29?