Recent content by Ffejs

Gonna go with the HDI system. 9” lift with a higher loop in raw water line with siphon vent. Down to a water lift then up over a loop higher than the transom thru hull out the rear. Gonna look just like trickdhat. Your post of the exhaust rebuild confirmed some thoughts of a fix. And easier yet...

Thanks for info. I did contact and talked to the guy. He says his unit will only work with the atomic 4. Says what i got will most likely need to be fabricated one off. Stressed whatever i do, Exhaust elbow and water inlet levels need to be same if not higher than original unit. Its all based on...

Thanks for the link. Do you have this on your E35? Does the lift to the elbow fit with the small space from manifold to the bottom of cockpit floor? Does the purchase include all that is seen in the pic?

Quick question. Haha. Have a1979 35-2 (555) with the yanmar 2qm20 and the standpipe type cast muffler has disolved. Through my research, a replacement type muffler would need to be custom fabricated, if i can even find someone with those skills. so no bolt on replacements. what have others done...

I would have thought the pinch pressure of the pinch bolts on the clamshell whould be enough. Next step to thread the existing hole edson give you so you may thread another pressure point onto the tiller post. Feels like drilling hole through the tiller post will be a failure point in the...

Navman, Just got my edson tiller arm and see that you have the recomended bolt going through the tiller post. Did you actually drill through your tiller post,?!?! If so did you continue the hole on the other side of clamshell and tap to take the provided bolt and how fun was all this to do?

Shes a 1979 E35. Somehow I came up with version 1 of the 35, i stand corrected. I will search for those pics. thanks

I am in the process of getting a under deck pelagic auto pilot. Have to build a tiller arm, they do not seem to be an over counter purchase and was hoping someone has done the same,where it came from and size. I have found edsonmarine and jefa. I will do my own measure of the tiller post...